Created with Sketch. Created with Sketch.

Shop by Category

Cams

  • Dyno Cams CM Grind Super X  - Hemi 212cc GX200 196cc

    Dyno Cams CM Grind Super X - Hemi 212cc GX200 196cc

    Dyno "CM" Modified Superbox Cam for Honda GX200, Predator 212 HEMI, or BSP Clone 6.5 with bored stock carb or tilly carb.* This cam provides .265" lift at the cam, which works out to .275" lift with the stock rockers.* Intake duration is 236 and Exhaust...

    Our Price: $50.00
    Add to Cart
  • MOD2 Grind, 196cc Clone GX200 Cheater Cam

    MOD2 Grind, 196cc Clone GX200 Cheater Cam

    Mod 2 Cheater Stock Cam for Honda GX200, BSP, or Blue Clone 6.5 HP engines. This cam meets the lift specs only of a stock cam. It has significantly more duration than the CL-1 cam giving more overall power. This cam WILL NOT pass a duration or profile...

    Our Price: $51.99
    Add to Cart
  • CS Grind, Clone Core Cam - Clone & Predator Hemi

    CS Grind, Clone Core Cam - Clone & Predator Hemi

    Agressive ramp cam for Modified class motor.Can use stock carb with this cam. Does require upgraded spring package.Billet rod and flywheel strongly recommended.Agressive ramp cam for Modified class motor.Can use stock carb with this cam. Does require...

    Our Price: $50.00
    Add to Cart
  • Camshaft Installation Tool Camshaft Installation Tool

    Camshaft Installation Tool

    Camshaft Installation Tool Made from .220" thick acrylic, this tools allows you to mock up your engine and inspect clearances such as cam lobe to cylinder, cam to rod, and crank to cam. Simply slide this tool over the cam and crank and lightly bolt to...

    Our Price: $15.00
    Out of stock
  • CL-1 Improved Racing Cam 196cc 6.5HP

    CL-1 Improved Racing Cam 196cc 6.5HP

    The CL1 Improved has a more retarded centerline for optimal top end horsepower.Engine: 196cc OHV CloneRecommended Class: StockTarget (MAX) RPM: 6000-6500Spring Pressure (In / Ex): 10.8 lbsValve Timing:INTAKEOPEN: 39 BTDCCLOSE: 82 ABDCLIFT: .224C/L: 112.5...

    Our Price: $36.00
    Add to Cart
  • 308 Grind, Welded Lobe Clone Cam

    308 Grind, Welded Lobe Clone Cam

    This welded and ground cam provides .308" lift at the cam, which works out to .320" lift with the stock rockers. For open modified applications. The 308 is our most popular grind for modified clone class. This cam is easy on the valve train and has a...

    Our Price: $102.00
    Add to Cart
  • F-275 Grind, Welded Lobe Clone Core Cam

    F-275 Grind, Welded Lobe Clone Core Cam

    Welded Lobe Cam for Modified Classes. This cam has a .278 lift and has maximum open valve duration (Duration at 50 - 258.8 Degree, Duration at 200 - 158.1) Max RPMs 8200-8400 Spring Pressure recommended IN/EX 32lbs Be careful with ratio rockers with...

    Our Price: $100.00
    Add to Cart
  • DC_CL2 DC_CL2

    DC_CL2

    Designed in 2013, the intake and exhaust lobes allow the CL-2 to run at higher RPMs before the engine goes into uncontrolled valve float. The DynoCams CL-2 is legal for the current profile rules for stock classes. The lobes are hardened for extra...

    Our Price: $39.99
    Add to Cart
  • 308 Grind, Tool Steel Billet Clone Core Cam

    308 Grind, Tool Steel Billet Clone Core Cam

    The 308 is our most popular grind for modified clone class. This cam is easy on the valve train and has a very wide power band. This cam requires an upgraded spring package, billet rod, and billet flywheel.The 308 is our most popular grind for modified...

    Our Price: $170.00
    Add to Cart
  • 356 Grind, Welded Lobe Clone Core Cam

    356 Grind, Welded Lobe Clone Core Cam

    The DynoCams 356 is a high lift modified grind that is very capable of extreme RPMs. This cam has very aggressive ramps and requires an upgraded spring package, billet rod, and billet flywheel. For use with Tillotson or larger carb.Engine: 196cc OHV...

    Our Price: $100.00
    Add to Cart
  • 275 Grind, Welded Lobe Clone Core Cam

    275 Grind, Welded Lobe Clone Core Cam

    This cam is to be used in mild modified applications. It will require an upgraded spring package, billet rod, and billet flywheel.This cam is to be used in mild modified applications. It will require an upgraded spring package, billet rod, and billet...

    Our Price: $100.00
    Add to Cart
  • BSP-4 Box Stock Racing Cam

    BSP-4 Box Stock Racing Cam

    New Box Stock Project camshaft is heat treated, hardened and has a higher RPM range for all stock and restricted classes. BSP-4 is AKRA legal. Also fits the Harbor Freight "Hemi" Predator.

    Our Price: $36.99
    Out of stock