Jet kit for Honda GX200, 196cc Clone, and Predator 212 engines. Includes a 140 emulsion tube and two jets: .036" and .037".
If your engine runs poorly, or on half choke after upgrading your Air Filter and Exhaust, this Kit will most likely solve your...
If you run a remote tank or you've removed your stock gas tank on a Predator 212cc, 196cc or other 6.5HP type engine this adapter allows you to run standard 1/4" fuel line to this adapter, and then use new or existing 3/16" fuel line to connect to your...
This is the stock O-Ring for the float bowl on both the Huayi and RuiXing Clone carbs.
BSP Clone GX200 Predator 212 Intake Insulator to Cylinder Head Gasket. Fits most 6.5HP engines
BSP/Clone/GX200/Predator 212 Replacement Carburetor
This is the stock NON-EPA type carb for the BSP/Dupor Clone engines. Nothing has been altered or changed on these carbs. Fits Honda GX160/GX200, Clone 196cc and Predator 212cc. Choke lever is included...
This OEM gasket for the BSP/Clone engine goes between the stock carburetor and the black intake insulator. An extra gasket is needed if a restrictor plate is used.
Genuine Walbro FPC-1 fuel pump for 1/4" hose
Carburetor Stud / Bolt for GX200 / Clones. This is the longer stud you need for Predator engines to mount an aftermarket air filter. This stud is approx 115mm - 4-1/2" long.
Carb. Throttle Rod & Spring Stock item for CloneAlso fits Baja MB200 - replaces MB200-341 and MB200-342 governor rod and governor spring.Carb. Throttle Rod & Spring Stock item for Clone
3/16" Hose Clamp - Black
This E-tube has a slightly larger main bore and less air bleed holes providing a better fuel signal at the jet. Improves performance accross the RPM range, but especially on bottom end and mid range. You will want a main jet between .035" and .037"...
Suggested for Race Carbs
For use with Open Element Air Filter on Std Bore Carb, Gas .020"
Stock Carbs use .015"