Air Filters

Angled Air filter 3-1/2" x 4" x 2-7/16"

Fabric Air Filter The standard angled air filter used in most 4 cycle karting engines. 3-1/2" x 4" with a 20 degree angle. The inside diameter of the mounting flange is 2-7/16". Most OHV kart engines will require an angled air filter! 3-1/2" X...

Foam Pre-Filter Red 3-1/2"x5"

Stainless Cone Air Filter for Small Body Mikuni VM22

Cone Air Filter, Race, 3" x 2.25" Inside diameter is 39mmStainless Steel CapFits 22mm Small Body Mikuni carbs. Color may vary. Carb not included Like all guaze type filters, this filter needs to be oiled for maximum filtration!

Outerwears Pre-Filter - 3'' x 3'' - Black

Outerwears are designed to keep the biggest and most damaging particles of debris from getting to your air filter.

Air Filter 3-1/2" x 6" x 2-7/16" Fabric Angled

Air Filter 3-1/2" x 6" x 2-7/16" Fabric Angled 3-1/2'' x 6'' 2-7/16'' Internal Diameter 20 Degree Angle Fits all standard 2-1/2 adapters Like all guaze type filters, this filter needs to be oiled for maximum filtration!

Air Filter 3-1/2" x 4" x 2-1/4" Fabric Tapered Chrome

3-1/2'' x 4'' 2-1/4'' Inner Diameter Tapered Chrome

Prefilter, Foam 3-1/2" x 5" Red

Foam Pre-Filter helps to keep the big chunks away from your air filter! Foam 3-1/2" x 5" Red Color

Air Filter 4-1/2'' x 4'' x 2-7/16" Fabric Straight

Air Filter 4-1/2'' x 4'' x 2-7/16" Fabric Straight Fabric Air Filter 4-1/2'' x 4'' x 2-7/16'' ID Fits all standard 2-1/2" adapters Like all guaze type filters, this filter needs to be oiled for maximum filtration!

Air Filter 3-1/2" x 4" x 2-7/16" Fabric Straight

Air Filter 3-1/2" x 4" x 2-7/16" Fabric Straight Fabric air filter 3-1/2" x 4" 2-7/16" Inner Diameter Fits all standard 2-1/2" adapters Like all guaze type filters, this filter needs to be oiled for maximum filtration!

Air Filter Adapter GX390 Predator 420

Designed for the Predator 420 GX340/390 stock Carburetor. Can be used with or without an Air Filter.Accepts Choke Bracket Holder (not included) Will work on GX270s, GX390s, and 13/15hp Chinese OHVs.Will also work on GX200s & 6.5 Chinese OHVs using...

Foam Filter 38mm ID Angled VM22 Small Body

Foam Filter - Angled - 38mm ID [1.5"] For use with small body Mikuni VM22 Details: Clamps directly to the carburetor Angled boot design 38mm [1.5"] Flange ID

Air Filter 3-1/2" x 8" x 2-7/16" Fabric Angled

Air Filter 3-1/2" x 8" x 2-7/16" Fabric Angled 3-1/2'' x 8'' 2-7/16'' Inner Diameter 20 Degree Angle Fits all standard 2-1/2" adapters Like all gauze type filters, this filter needs to be oiled for maximum filtration!