This flywheel puller is designed for those who don't want to use the "knocker" method to remove their flywheel. Works with:
ALL ARC Flywheels with Steel Adjustable Timing Hubs
PVL Clone flywheel
To use, install the...
Crankshaft Holder Tool for 3/4" cranks
No more struggling to hold the crank when torqueing a flywheel! This tool slides over any 3/4" keyed crank and allows the flywheel to be torqued properly.
Simply slide this tool onto the crank, insert key and the...
SFI certified billet aluminum flywheel for the Briggs & Stratton 5 HP flathead engine. The keyway is installed to advance the ignition timing to 30 degrees BTDC. The flywheel weighs 4.05 lbs. You can use either the stock pull starter or a hand-held...
Starter Nut for Animal and Honda GX390 16 x 1.5mm thread pitch.Stubby
ARC's new light weight Animal flywheel for the Briggs PVL ignition. At 1.6lbs it is the lightest flywheel on the market for instant throttle response. SFI certified. Must be used with the Briggs PVL coil.
Universal flywheel screen to fit both the Animal & Clone engines.
Flywheel Washer for Briggs 5hp Flat Head
Factory Stock Crank Bearings for Briggs Flathead Engines
Our billet SFI Certified Limited Modified flywheel with adjustable timing for the Briggs & Stratton 5hp flathead "raptor" engine. The keyway is in the stock position when the flywheel's indexed adjustable timing hub is set to the negative side of...
ARC's new light weight Animal stroker flywheel for the Briggs PVL ignition. At 1.6lbs it is the lightest flywheel on the market for instant throttle response. SFI certified. Must be used with the Briggs PVL coil.
Stroker Animal Flywheel Hub
SFI certified billet flywheel for the Briggs 5hp flathead. 5-3/4" diameter(3hp) adjustable timing flywheel with rare earth magnets for a hotter spark. Timing set at 23 BTDC with 14 degrees advancement by utilizing ARC's innovative timing advance hub...