Categories - OMBWarehouse.com

SPECIAL ORDER: 10+

Quick view

Stens

Starter Solenoid / Fits 532192507

Starter Solenoid / Fits 532192507Pack Size:1Fits AYP 192507, Fits 532192507, Fits Ariens 21546294, Fits AYP 532192507Rotary 14222Solenoid: Grounded through terminal, base not grounded, Made By: An OEM supplierOEM Cross Reference:Fits AYP 192507, Fits...

$23.01

$17.99

Add to Cart
Quick view

Rotary Corp

Pin Cotter Cp-106 5/32 X 2 1/2

Rotary Corp brand aftermarket product. Pin Cotter CP-106 5/32" X 2-1/2"Dimensions:DIAMETER: 5/32"LENGTH: 2-1/2"

$1.49

Add to Cart
Sold out

Quick view

Stens

Flat Idler / Fits 116-4666

Flat Idler / Fits 116-4666

$54.58

$39.69

Out of stock
SPECIAL ORDER: 10+

Quick view

Rotary Corp

Rotary Corp Brand Belt Deck 5/8" X 103.5" For : M169500 Models For : X350, Fs600, Fs651, Fs730, X330, X370, X380, X390, X570, X590

Rotary Corp brand aftermarket product. Rotary Corp Brand Secondary Deck Drive Belt M169500, wrapped, aramid cord construction. models X330, X350, X370, X380, X390, X570, X590, FS600, FS651 and FS730.

$60.32

$34.99

Add to Cart
SPECIAL ORDER: 10+

Quick view

Rotary Corp

VOLTAGE REGULATOR Replaces KAWASAKI: 21066-0785, 21066-0810, 21066-0740 Fits Models KAWASAKI: FX730, FX600, FX691, FX751, FX801, FX850, FX921, FXT100

Twenty amp voltage regulator for Kawasaki. Replaces Kawasaki numbers 21066-0810 and 21066-0740. Fits models FX730, 600, 691, 751, 801, 850, 921, FXT100, and many more.

$60.54

$34.99

Add to Cart
Sold out

Quick view

NR RACING

Head, Racing, Billet, GX160 & GX200, 15cc, Bigger Valve

"MoFlow-1 by BlackMarkit The new Moflow has been completely reworked to accept ""bigger"" valves, utilizing a 36mm intake valve and a 27mm exhaust. The valve spacing has been widened to safely accommodate the larger valves, along with the rocker stands...

$926.00

Out of stock
Sold out

Quick view

NR RACING

Head, Racing, Billet, GX160 & GX200, 14cc

"MoFlow-1 by BlackMarkitBillet Cylinder Head for Small Block GX160/GX200, and Clone Engines 32mm intake and 25mm exhaust Optimized flow and velocity 14cc combustion chamber Comes with 45lb springs, titanium retainers, stainless steel valves, seats, and...

$700.00

Out of stock
Sold out

Quick view

NR RACING

Carb Kit 28mm Flat Slide, GX240/270 Predator 301 Gas

"GX270 28mm Flat Slide Gas Carb Kit Kit includes manifold/adapter, air filter, air filter adapter/velocity stack, hose, and clamps. (Note: this has a square slide carb, which is far superior to the cheap round slide Mikunis.) Comes with jet kit, but...

$211.00

Out of stock
Sold out

Quick view

NR RACING

Manifold, Moflow "Bigger Valve" Head, 40mm OD

"40mm OD x 34mm ID Manifold exclusively for Billet Moflow ""Bigger Valve"" Heads Wide bolt spacing 46mm intake - fits ""Bigger 36 x 27"" valve Moflow Spigot (hose) style 3"" long "

$87.99

Out of stock
Sold out

Quick view

NR RACING

Manifold, Moflow "Bigger Valve" Head, 35mm OD

"35mm OD x 30mm ID Manifold exclusively for Billet Moflow ""Bigger Valve"" Heads Wide bolt spacing 46mm intake - fits ""Bigger 36 x 27"" valve Moflow Spigot (hose) style 3"" long "

$87.99

Out of stock
Quick view

NR RACING

Exhaust Kit, Make Your Own, GX390

Make Ur Own GX390 Exhaust KitCan't find a system to fit your application? Use this kit to fabricate your own system! This can be either clamped or welded together.1-1/8" (1.125") OD pipe with one end flared to 1-1/8" ID to connect pipes.*Muffler not...

$70.22

Add to Cart
Quick view

NR RACING

Exhaust Kit, Make Your Own, GX200

Make Ur Own Exhaust Kit - Karting - GX200Cant find a system to fit your application? Use this kit to fabricate your own system! Can be either clamped or welded together.1" OD pipe with one end flared to 1" ID to connect pipes.*Muffler not included

$70.22

Add to Cart
Quick view

NR RACING

Lifter, 13hp, Aftermarket Replacement (Chinese), Each

Aftermarket Replacement Lifter for 13/15hp Chinese OHVs*Note: Sold individually. Clone lifters have a lot of variance in length and may be slightly longer than Genuine Honda lifters.

$3.99

Add to Cart
SPECIAL ORDER: 10+

Quick view

NR RACING

Rocker Arm, 1.3 Ratio; GX200, 6.5 OHV, & 212 Predator (Old Style); Genuine Yamaha, Each

"Stamped 1.3 Ratio Genuine Yamaha Rocker Arms - Each Stronger and better design than the clone version of these rockers Use with 22lb springs and stock lift cams only. Price is for single rocker. Fits GX200s, 6.5 BSP ""Clones"", and old-style 212...

$13.95

Add to Cart
Quick view

NR RACING

Oil Drain Extension, Drainzit; GX240 to GX390, 420cc Predator

Honda Oil Drain Extension for GX240 to GX390 and 420cc PredatorChange oil without the mess! This Drainzit brand extension is easy to install, simple to use, and requires no engine modification. May be used on nearly all equipment powered by small...

$32.99

Add to Cart
Quick view

NR RACING

Carb Kit, 22mm Mikuni Round Slide, Economy Kit: GX200, 6.5 Chinese OHV, & 212 Predator

"22mm Round Slide Mikuni Gas Carburetor KitFits all GX160s, 200s, 6.5 Chinese OHVs, and Predators. Great for mini bikes.A low-cost way to add HP! Kit Includes: 22mm Mikuni Style Carb (Small Body) Manifold/Adapter Air Filter (Foam or Filter) Intake...

$79.00

$78.95

Add to Cart
Quick view

NR RACING

Oil Drain Extension, Drainzit; GX120 to GX200, 6.5 OHV, 212 Predator

Change oil without the mess! This Drainzit brand extension is easy to install, simple to use, and requires no engine modification. May be used on nearly all equipment powered by small engines: pressure washers, generators, pumps/sprayers, compressors,...

$31.49

$29.81

Add to Cart
Quick view

NR RACING

Gasket, Head, 460cc (92mm), Fiber .045"

".045"" Fiber Gasket to Fit 90-92mm Bores Will fit most 420cc and up 13/15hp Chinese OHVs *Picture is for reference only. Color and style may vary."

$14.99

Add to Cart
SPECIAL ORDER: 10+

Quick view

NR RACING

Clip, Piston Pin, Wiseco .490, Spiral Lox Style, Pair

Wiseco Spiral Lox Clips for .490 Pins - One Pair

$7.99

Add to Cart
Quick view

NR RACING

Gasket, Head, Fiber with Fire Ring, 3.0" (76mm) Bore, .045" Thick

"High Quality Cometic Fiber Head Gasket for 3.0"" (76mm) Bore Best sealing of all the head gaskets we sell! Fits 212 Predators, GX200s, and 6.5 Chinese OHVs with 3.0"" bores "

$22.49

Add to Cart
Quick view

NR RACING

Gasket, Head, Fiber with Fire Ring, 2.815" (72mm) Bore, .045" Thick

"High Quality Cometic Fiber Head Gasket for 2.815"" (72mm) Bore Best sealing of all the head gaskets we sell! Fits 212 Predators, GX200s, and 6.5 Chinese OHVs bored to 2.815"" (72mm). "

$22.49

Add to Cart
Sold out

Quick view

NR RACING

Degree Wheel with Quick-Set Arbor

Quick-Set Degree Wheel KitThe arbor shaft slips over the PTO and uses a slip-clutch to provide quick and easy degree wheel operation on all 4-cycle engines. The 360 degree markings make Chinese OHV duration checks a snap when used with cam checking tools...

$66.69

$61.45

Out of stock
Quick view

NR RACING

Catch Can, LO206 Style, Carbon Fiber

Carbon Fiber Catch Can (Tank) - Briggs LO-206 StyleOne 1/4" inlet, one 3/16" inlet (carb overflow), and one 5/16" outlet

$51.62

Add to Cart
Quick view

NR RACING

Catch Can, GX200/Clone Style, Carbon Fiber

Carbon Fiber Catch Can (Tank) - GX200/Clone StyleOne 1/4" Inlet and One 5/16" Outlet

$51.62

Add to Cart
Quick view

NR RACING

Spark Plug, NGK Iridium, BPR6EIX

BPR6EIX NGK Iridium Spark PlugSame heat range as the OEM plug, but with iridium tip for long life and high-compression applications.

$12.15

$11.03

Add to Cart
Quick view

NR RACING

Driver (Sprocket), Bully Turbo 1", #35 Chain

#35 Chain, fits Bully Turbos for 1" shaftsAvailable in 14-20 Tooth*Manufacturer of driver may be Bully or other company, depending on availability.

$34.17

Add to Cart
Quick view

NR RACING

Adjustable Timing Bracket, GX200, 6.5 Clone, 212/224 Predator Tillotson

Adjustable Ignition Coil Bracket for GX200, 6.5 Clone, 212/224 PredatorKit Includes Front and back adjustable bracket plates Bracket hardware Billet spacers Mounting hardware The adjustable ignition timing bracket kit allows you to adjust timing...

$63.95

Add to Cart
Quick view

NR RACING

Catch Can, Large, Billet Aluminum, Silver

"High-Quality Large Aluminum Catch Can Choice of Colors: Red, Blue, Gold (Yellow), Silver, or Black Gloss Finish Tank Size: 6.25 x 3.25 x 3.25 Capacity: 750 ML Billet or TIG Welded T-6061 Light-Weight Aluminum Construction Catch oil and sludge to save...

$47.10

Add to Cart
Quick view

NR RACING

Catch Can, Large, Billet Aluminum, Red

"High-Quality Large Aluminum Catch Can Choice of Colors: Red, Blue, Gold (Yellow), Silver, or Black Gloss Finish Tank Size: 6.25 x 3.25 x 3.25 Capacity: 750 ML Billet or TIG Welded T-6061 Light-Weight Aluminum Construction Catch oil and sludge to save...

$22.79

Add to Cart
Quick view

NR RACING

Catch Can, Large, Billet Aluminum, Gold

"High-Quality Large Aluminum Catch Can Choice of Colors: Red, Blue, Gold (Yellow), Silver, or Black Gloss Finish Tank Size: 6.25 x 3.25 x 3.25 Capacity: 750 ML Billet or TIG Welded T-6061 Light-Weight Aluminum Construction Catch oil and sludge to save...

$33.06

Add to Cart
Quick view

NR RACING

Catch Can, Large, Billet Aluminum, Blue

"High-Quality Large Aluminum Catch Can Choice of Colors: Red, Blue, Gold (Yellow), Silver, or Black Gloss Finish Tank Size: 6.25 x 3.25 x 3.25 Capacity: 750 ML Billet or TIG Welded T-6061 Light-Weight Aluminum Construction Catch oil and sludge to save...

$22.79

Add to Cart
Quick view

NR RACING

Catch Can, Large, Billet Aluminum, Black

"High-Quality Large Aluminum Catch Can Choice of Colors: Red, Blue, Gold (Yellow), Silver, or Black Gloss Finish Tank Size: 6.25 x 3.25 x 3.25 Capacity: 750 ML Billet or TIG Welded T-6061 Light-Weight Aluminum Construction Catch oil and sludge to save...

$22.79

Add to Cart
Quick view

NR RACING

Head Dowel, GX240 to GX390, 12mm x 16mm, Genuine Honda, Each

Genuine Honda 12 x 16 Head Dowel for GX240-GX390 Pic shows 2 dowel for reference, but only 1 dowel is included*Sold Individually

$3.60

$3.33

Add to Cart
Quick view

NR RACING

68mm Piston GX200 196cc "Clone", Flat-Top Kit (Includes Rings, Wristpin, & Clips)

Chinese OHV 68MM Flat-Top Piston Kit Fits Honda GX200, 196cc Clones, Coleman 200 series (196cc Clone) engines Standard 68MM bore only with rings, clips, and wrist pin included Does not fit any predator 212 with a 70mm bore

$24.99

Add to Cart
SPECIAL ORDER: 10+

Quick view

NR RACING

68mm Piston, GX200, Flat-Top: Aftermarket Replacement (Chinese), Standard

"Chinese OHV Flat-Top Piston for GX200 Standard bore only Available as stand alone (piston only) or in kit form (with rings, clips, and wrist pin). Rings also sold separately (uses 1.0mm style rings) "

$10.99

Add to Cart
SPECIAL ORDER: 10+

Quick view

NR RACING

Socket for ARC Billet GX270 & GX390 Rods

12pt 5/16", 3/8" Drive for ARC Rod BoltsFits GX270s and GX390s. Will not fit GX200s or 212 Predator rods.*Picture is for reference only. Band or markings may vary.

$11.45

Add to Cart
SPECIAL ORDER: 10+

Quick view

NR RACING

Pilot, Valve Seat Cutter, 5.0mm Valves

"Valve Seat Cutter for 5.0mm Valves 5.0mm pilot for 212 Predators with 5.0mm stems Will not fit 5.5mm Predators, Hondas, or other clones. Use with NR Racing valve seat cutter kits. "

$25.77

Add to Cart
Sold out

Quick view

NR RACING

Piston, 90mm Flat-Top for 420cc Hemi Predator, New Take-Off

"New Take-Off 90mm Aftermarket Flat-Top Piston for Hemi 420cc PredatorIncludes piston and ringsWill fit most 390 style enginesValve reliefs for Hemis and slight bevelPiston measures .660 from top of piston to top of wrist pin.GX390 blocks can be bored to...

$17.99

Out of stock
Sold out

Quick view

NR RACING

Valve Cover, 420 Hemi Predator

OEM 420 Hemi Predator Valve Cover*Note: Will not fit OHVs. Gaskets and bolt/washer not included.

$22.65

Out of stock
Sold out

Quick view

NR RACING

Stock Rocker Arms, 420 Hemi Predator, OEM with Pins, Pair

"Rocker Arms for Hemi 420 Predators Includes pins and hardware Will not fit OHVs "

$12.99

Out of stock
Quick view

NR RACING

Spacer, Valve Cover, Billet Aluminum, GX270 & GX390 Predator 301 420 non-Hemi

"Billet Aluminum Valve Cover Spacer for GX270 and GX390 Allows roller rockers to clear valve cover baffle. Valve cover spacer nestles nicely under the stock valve cover, and comes with a CNC-machined aluminum bolt to replace the stock steel bolt. "

$39.26

Add to Cart
Quick view

NR RACING

Stud Kit, Side Cover with Solid Dowels: GX270, GX390, & 420 Predator

Side Stud Kit for GX270, GX390, and 420 PredatorIncludes:Side Cover Studs (316 SS)Washers & NutsSolid Case Dowel Pins*Note: Mandatory for all HP applications. Will not fit 460s with 10-bolt covers. Picture is for reference only.

$26.44

Add to Cart
Quick view

NR RACING

Rebuild Kit, Carb, GX240 to GX390: Genuine Honda

Genuine OEM Honda Carb Rebuild Kit for GX240-GX390

$17.30

$15.45

Add to Cart
SPECIAL ORDER: 10+

Quick view

NR RACING

Rebuild Kit, Carb, GX120 to GX200: Genuine Honda

Genuine OEM Honda Carb Rebuild Kit for GX120 to GX200

$17.30

$15.45

Add to Cart
SPECIAL ORDER: 10+

Quick view

NR RACING

Breather Hose (Tube), GX120 to GX200: Genuine Honda

"Genuine Honda Breather Tube for GX120-GX200 OEM replacement part, new in package Honda part # 15721-ZH8-000 "

$4.39

$3.92

Add to Cart
SPECIAL ORDER: 10+

Quick view

NR RACING

Breather Hose (Tube), GX270 to GX390: Genuine Honda

Genuine OEM Honda Breather Hose (Tube) for GX270 to GX390*Item #7 on diagram (pictured)

$8.48

$7.57

Add to Cart
SPECIAL ORDER: 10+

Quick view

NR RACING

Gasket, Head, 225 Tillotson (72mm), Fiber, .045"

Fire ring head gasket for the Tillotson 225RS engine. Compatible with the following engines / engine packagesTillotson 225RS225cc Tillotson Performance Engine (GPS special)225RS Tillotson Engine Long Block225cc/228cc Short Block Kit, U-Build-ItAny other...

$9.50

$7.99

Add to Cart
SPECIAL ORDER: 10+

Quick view

NR RACING

Ring Set, 72mm Tillotson 225RS

Piston Rings for Tillotson 225RS Piston (138220004)Low tension piston rings found in 236-SKA Stroker Kit.

$18.29

$16.19

Add to Cart
Quick view

Spring Seat Cutter for 5.0mm Valve Guides

Spring Seat Cutter for 5mm Valve GuidesUsed for cutting spring seats for dual springs and/or increasing spring installed height 5.0mm to fit OHV Predators and WildCat heads that use 5.0mm stemmed valves *Note: Spring seat cutters are not returnable.

$194.00

$188.00

Add to Cart
Quick view

Valve & Spring Package, Stainless Steel, GX390 with Single Springs

Racing Valve and Spring Package for GX390Includes: 36mm SS Lightweight Intake 32mm SS Exhaust Valve Single Springs Aluminum Retainers Split Keepers Lash Caps *Note: Use single springs for up to 6500rpm & 306 TQ cam. Use dual springs for 306 RM...

$199.95

Add to Cart
Quick view

Valve & Spring Package, Stainless Steel, GX390 with Dual Springs, Titanium

Racing Valve and Spring Package for GX390Includes: 36mm SS Lightweight Intake 32mm SS Exhaust Valve Dual Springs Titanium Retainers Split Keepers Lash Caps *Note: Use single springs for up to 6500rpm & 306 TQ cam. Use dual springs for 306 RM...

$210.95

Add to Cart
Quick view

Valve & Spring Package, Stainless Steel, GX390 with Dual Springs, Aluminum Retainers

Racing Valve and Spring Package for GX390Includes: 36mm SS Lightweight Intake 32mm SS Exhaust Valve Dual Springs Aluminum Retainers Split Keepers Lash Caps *Note: Use single springs for up to 6500rpm 32mm valves may actually measure between 31.5mm...

$199.95

Add to Cart
Quick view

Rocker Arms, Roller Tip, Billet Steel; GX270, GX390, & 13/15 Chinese OHV; 1.2 Ratio, Pair

NR Racing Roller Tip Rocker Arms for GX270, GX390, and 13/15 Chinese OHV - PairChoice of 1.2 or 1.3 Ratio Machined from chrome-moly steel Hardened roller tips and shafts Dyno-tested to 10,000rpm and proven to increase horsepower Uses stock shaft and...

$109.00

Add to Cart
Quick view

Ring Compressor, Aluminum, 70mm

This is the best and easiest compressor to use. Once you use this, you will never use a band or adjustable compressor again!May be black or silver, depending on availability.

$19.99

Add to Cart
SPECIAL ORDER: 10+

Quick view

Jet, Mikuni, Pilot, Small Round Slide, 17.5

Pilot Jet Used in Mikuni RS and HS Carburetors, and Small Body Mikunis (Mikuni #VM28/486) Fits Mikuni small body 22mm-26mm round slide carbs Will not fit flat slide or large body round slides. Small body carbs are used in OEM applications and referred...

$4.15

$4.00

Add to Cart
SPECIAL ORDER: 10+

Quick view

Jet, Mikuni, Pilot, Small Round Slide, 15.0

Pilot Jet Used in Mikuni RS and HS Carburetors, and Small Body Mikunis (Mikuni #VM28/486) Fits Mikuni small body 22mm-26mm round slide carbs Will not fit flat slide or large body round slides. Small body carbs are used in OEM applications and referred...

$4.15

$4.00

Add to Cart
Quick view

Jet, Mikuni, Pilot, Small Round Slide, 12.5

Pilot Jet Used in Mikuni RS and HS Carburetors, and Small Body Mikunis (Mikuni #VM28/486) Fits Mikuni small body 22mm-26mm round slide carbs Will not fit flat slide or large body round slides. Small body carbs are used in OEM applications and referred...

$4.15

$4.00

Add to Cart
Quick view

NR RACING

Battery, 10A (For Coleman Starter)

10 Amp Replacement Battery for Coleman Starters*Sorry, cannot be shipped to international locations.*No warranty or returns on batteries! These are the cheapest batteries available, and we only carry them for the convenience of our customers. You...

$52.49

Add to Cart
Sold out

Quick view

NR RACING

Valve Set, 6.5 BSP "Clone"

Stock Replacement Valve Set for 6.5 BSP/AKRA ClonesIncludes 25mm/24mm valves, retainers, and stock springs*Note: Will not fit 69727 CA Predators (5.0mm) or Hemi Predators. New take-off product.

$11.92

Out of stock
SPECIAL ORDER: 10+

Quick view

NR RACING

Valve Set, Predator 212 Non-Hemi with 5mm Stems

Stock Replacement Valve Set for Predator 212 Non-Hemi with 5.0mm Valves and Split KeepersIncludes retainers and keepers*Note: Springs not included. Picture is for reference only. Will not fit other Predators. New take-off.

$18.15

Add to Cart
Quick view

NR RACING

Valve, 42mm x 6.5mm

"42mm x 6.5mm Stainless Steel Valve 42mm Face x 6.5mm Stem x 3.465"" Long Requires aluminum or titanium retainers and split keepers +.100 Longer than stock Requires larger seat "

$63.15

$59.95

Add to Cart
Quick view

NR RACING

Valve, 40mm x 6.5mm

"40mm x 6.5mm Stainless Steel Valve 40mm Face x 6.5mm Stem x 3.465"" Long Requires aluminum or titanium retainers and split keepers +.100 Longer than stock Requires larger seat "

$89.95

Add to Cart
SPECIAL ORDER: 10+

Quick view

NR RACING

Valve, 38mm x 6.5mm

"38mm x 6.5mm Stainless Steel Valve 38mm Face x 6.5mm Stem x 3.465"" Long Requires aluminum or titanium retainers and split keepers +.100 Longer than stock Used for 420 Hemi Predator intakes. Can be used on GX390s with larger seats. * Note: Valve...

$89.95

Add to Cart
SPECIAL ORDER: 10+

Quick view

NR RACING

Valve, 34mm x 6.5mm

"Stainless Steel Valve 34mm Face x 6.5mm Stem x 3.465"" Long Requires aluminum or titanium retainers and split keepers +.100 Longer than stock Used for 420 Hemi Predator exhaust. Can be used on GX270 intake with larger seat. *Note: Valve may be coated...

$89.95

Add to Cart
Quick view

NR RACING

Porting & Polishing Kit, Sanding Rolls

Porting and Polishing Kit Use for head porting and polishing, or for finishing after using carbide cutters. Use with any 1/4" die grinder.

$84.20

Add to Cart
Quick view

NR RACING

Throttle Cable with Sleeve, Mikuni End, 70" (Kart)

Throttle Cable with Sleeve for Mikuni CarbsHas straight end with barrel for attaching to gas pedal.

$11.95

Add to Cart
Quick view

NR RACING

Adapter, Carb to Manifold (Hose), 33/34mm Mikuni to GX390 Manifold, 45 Degree

Carb to Manifold Adapter - 33/34mm Mikuni to GX390Lightweight hose for adapting 32/34mm Mikunis to NR Racing GX390 aluminum manifolds, angled at 45 degrees. Color may vary.

$13.95

Add to Cart
SPECIAL ORDER: 10+

Quick view

NR RACING

Adapter, Carb to Manifold (Hose), 24/28mm Mikuni to GX200 Manifold, 90 Degree

"Carb to Manifold Adapter - 24/28mm Mikuni to GX200 Manifolds Used to adapt Mikuni flat slides to manifolds Use for 24/28mm Mounts carb parallel to motor at a 90 degree angle Made of high temp silicone *Picture is for reference only. Color may vary."

$13.90

$10.86

Add to Cart
SPECIAL ORDER: 10+

Quick view

NR RACING

Ring Set, 92mm for 13/15hp Chinese OHV (Cast Piston), Thin Ring

92mm Ring Set for Chinese OHVs*Fits thin ring cast pistons only. Will not fit forged pistons..047" Top, .047" Middle, .096" Oil

$16.53

Add to Cart
SPECIAL ORDER: 10+

Quick view

NR RACING

Ring Set, 90mm "Thick", 420 & 440cc Chinese OHV

90mm Ring Set for 420 & 440 Chinese OHVsFits earlier Predators & all 90mm using "thick" rings. Also fits NR Racing forged 90mm pistons. Will not fit new-style Predators using thin rings. Top Ring .076" 2nd .076" Oil .106"

$10.99

Add to Cart
Quick view

NR RACING

Ring Set, 90mm "Thin" for 420 Predator

90mm Ring Set for 420cc Predators Using Thin RingsWill also fit NR Racing 420 Hemi flat-top pistons. Will not fit new-style Predators using "thick" rings.Top Ring .046"2nd .046"Oil .096"

$10.99

Add to Cart
Quick view

NR RACING

Rocker Arms, Reinforced, GX200, Predator 212 224 non-Hemi Pair

Extreme Heavy Duty, Reinforced Rocker Arms - Pair 1.1 to 1 ratio Use with up to 26lb springs Fits GX200, Predator 212 224 non-Hemi, and BSP "Clones"

$39.95

Add to Cart
Quick view

NR RACING

Rocker Arms, Reinforced, GX240 to GX390, Pair, Predator 420 non-Hemi

"1.1 Ratio Reinforced Rocker Arms - Pair 1.1 Ratio Reinforced Rocker Arms - Pair Welded and reinforced for use with HD springs Fits GX390s, 420 OHVs, and GX270s non-Hemi engines *Style may vary from picture.

$45.95

Add to Cart
Quick view

NR RACING

Guide Plate, Free Floating with Bronze Bushing, 3/16" GX200 & 6.5 Chinese OHV Predator 212

3/16" HP Guide Plate for GX160, GX200, and 6.5 OHV Clone For GX200s, 160s, and 6.5 Chinese OHVs (will not fit GXX120s). Also fits Predator 212 224 non-Hemi, 196cc Clone, and Tillotson non-hemi head engi9nes Designed and manufactured for precise pushrod...

$27.99

Add to Cart
Sold out

Quick view

NR RACING

Head, Racing, Billet, GX160 & GX200, 23cc, Bigger Valve

"MoFlow-1 by BlackMarkit The new Moflow has been completely reworked to accept ""bigger"" valves, utilizing a 36mm intake valve and a 27mm exhaust. The valve spacing has been widened to safely accommodate the larger valves, along with the rocker stands...

$645.00

Out of stock
Sold out

Quick view

NR RACING

Head, Racing, Billet, GX160 & GX200, 18cc

"MoFlow-1 by BlackMarkitBillet Cylinder Head for Small Block GX160/GX200, and Clone Engines 32mm intake and 25mm exhaust Optimized flow and velocity 18cc combustion chamber Comes with 45lb springs, titanium retainers, stainless steel valves, seats, and...

$700.00

Out of stock
Sold out

Quick view

Stens

Carburetor Gasket Tecumseh 26756

Tecumseh 26756EthanolNot compatible with greater than 10% ethanol fuel

$2.16

$2.09

Out of stock
SPECIAL ORDER: 10+

Quick view

Rotary Corp

.043 .325 59 LKS SEMI-CHISEL WITH BUMPER LINK Replaces : 596553359

Requires 3/16" File

$23.18

$14.99

Add to Cart
SPECIAL ORDER: 10+

Quick view

Rotary Corp

.043 .325 51 LKS SEMI-CHISEL WITH BUMPER LINK Replaces : 596553351

Requires 3/16" File

$19.86

$13.59

Add to Cart
SPECIAL ORDER: 10+

Quick view

Rotary Corp

.043 .325 64 LKS SEMI-CHISEL WITH BUMPER LINK Replaces : 596553364

Requires 3/16" File

$26.87

$16.29

Add to Cart
Quick view

OMB

Predator 224cc Hemi Side Cover Gasket

Predator 224 HEMI sidecover gasket Made from .015" FelPro material in the USA This will not fit the Predator 224cc non-Hemi engine with the octagon shaped valve cover...for the Predator 224cc HEMI only!

$6.99

Add to Cart
Sold out

Quick view

Stens

Fitting 22mm Male x 22mm Male

22mm Male x 22mm Male4000 PSI MaxGallons Per Minute10.500Inlet22 mmInlet Thread TypeM 22mmMax Temperature300ï¿½FOutlet22 mmOutlet Thread TypeM 22mm

$5.90

Out of stock
SPECIAL ORDER: 10+

Quick view

NR RACING

Piston, 72mm, 225RS Tillotson

Tillotson Racing 225RS Piston - 72mm (2.835")Replacement Piston for 236-SKA Stroker Kit Lightweight Hypereutectic PistonThe piston uses the latest technology and design utilizing a racing slipper skirt vs. a conventional barrel skirt design of other...

$30.86

$27.55

Add to Cart
Quick view

OMB Warehouse

Mini Bike Front Axle 9.6" Long Fits Coleman Trail CT200U 9000-FBO-14150-245

Front Axle Bolt Fits Coleman CT200U Mini Bike Length: 245mm [9.6"]Overall Length: 258mm [10.1"] includes headM14 x 1.5Length excluding head: 25.6cm [10.1"]41103/HS200May fit other makes and models of mini bikes and motorcycles. Please check pictures and...

$16.95

Add to Cart
Quick view

1-1/8" Exhaust Silencer, Mini 91 "Slip On"

Finally a small diameter, lightweight, silencer for 1-1/8" header pipes! This Mini 91 silencer has a total length of 4-1/2" and 1-5/8" diameter The clamp that is included is for safety wire and not to attach the muffler to the header pipe!

$18.95

Add to Cart
Quick view

RLV

RLV 1-1/8" Stainless Muffler Clamp

RLV stainless clamp for 1-1/8" mufflers

$6.95

Add to Cart
SPECIAL ORDER: 10+

Quick view

Stens

Hi-Lift Blade Kubota 70000-25004

Kubota 70000-25004Center hole1 1/8"Heavy DutyTRUELength18 5/8"Made ByAn OEM SupplierPackaging typeBranded labelThickness0.236"Width2 1/2"

$27.76

$20.09

Add to Cart
Quick view

Honda

Genuine Honda GX390 Crankshaft 13310-ZF6-W12

Genuine Honda crankshaft for GX390 part # 13310-ZF6-W12. 1" output shaft

$157.00

$141.99

Add to Cart
Quick view

NR RACING

Breather Hose 90 Degree GX200 Clone Predator 212 BREATHEREXTENSION

90 degree breather hose allows for the filter to be mounted in various locations

$4.94

Add to Cart
Sold out

Quick view

Stens

Fuel Cap Briggs & Stratton 795027 125-390

Briggs & Stratton 795027ThreadedVented without screw down ventEthanolNot compatible with greater than 10% ethanol fuelID2"

$16.26

$12.09

Out of stock
Quick view

Magna-Matic

Magna-Matic Service Center Stand (For Sharpeners)

$380.00

Add to Cart
Quick view

Magna-Matic

Magna-Matic MAG-12008 Professional Blade Cleaner

$1,400.00

Add to Cart
Quick view

Magna-Matic

Universal Blade Sharpener Magna-Matic MAG-8000

$1,289.00

Add to Cart
Quick view

ARC Racing

Bare Block 68mm Bore, Fits 196cc Clone

Box Stock Project GX200 Clone Bare Block

$63.60

Add to Cart
Quick view

MAHLE MGX909 can be replaced by MAHLE 16.915.778 Alternator Rectifier

$34.99

Add to Cart
Sold out

Quick view

MAHLE

Stator, alternator - MGX1260 MAHLE

$25.00

Out of stock
SPECIAL ORDER: 9

Quick view

Stryder Rt Foot Ascender

ISC's Stryder Foot Ascender is created with the arborist specifically in mind. It includes a lightweight cam with a coned face for firm and reliable grip with minimal wear on your rope.Replaces:ISC IRP227A1

$124.50

$119.19

Add to Cart
SPECIAL ORDER: 10

Quick view

Vesco Straight Blade Hedge Shears

The S1/75 Vesco Straight Blade Hedge Shears are made with tempered carbon steel. The tool also has a shock-absorber and a cushion. The handles are made of aluminum eurogrip, ergonmic and non slip in bi-component material.Replaces:VESCO...

$95.19

Add to Cart
SPECIAL ORDER: 10+

Quick view

Small Rigging Block 3/4" By Isc

ISC Small 3/4" Rigging Block. Heavy duty aluminum alloy cheek plates, bushings and pulleys are supported by stainless steel axles. Spring lock side plates offer high strength to weight ratio and quick twist rope access. Work load limit is 4400 lbs...

$343.75

$295.69

Add to Cart
SPECIAL ORDER: 10+

Quick view

Vesco Curved 13" Handsaw With Sheath

The C50/32 Vesco Curved 13" pull-stroke Handsaw ensures a clean, precise cut. The blade has a three-sided cutting edge and tempered teeth. The blade also includes a smooth sided surface that improves the performance during cutting and ensures healing of...

$59.89

Add to Cart

Items 6801 to 6900 of 10000 total

64
65
66
67
68
69
70
71
72
73
74