Performance Engine Parts - OMBWarehouse.com

Quick view

Autolite

AR3910X Racing Spark Plug - Predator & Fits Honda Clone

This is the spark plug you want for high performance Gasoline or Methanol. We have seen as much as a 3/4 HP gain simply by changing to this plug.Plug fits Predator 212cc , Predator 301cc, Predator 420cc enginesAlso fits Clone 196cc, GX160, GX200 engines.

$13.73

$8.99

Add to Cart
Quick view

OMB Warehouse

Throttle Assembly for Ungoverned Engines GX200 Predator 212

This is the throttle you have been waiting for! Use your stock fuel tank and still have great throttle action for ungoverned engines! Made from heavy gauge stainless steel, this throttle is the smoothest you will find. A nylon bushing supports the...

$22.99

Add to Cart
Quick view

OMB Warehouse

Predator 212cc / Clone 196cc Air Filter Kit

This kit will fit Predator 212cc, Fits Honda GX160/GX200, Tillotson, and most Chinese 6.5HP OHV Clone engines. This contains the parts included in our performance kits that use the standard adapter. (1) Angled Air Filter 3-1/2 x 4 (1) Billet Aluminum...

$33.11

Add to Cart
Quick view

ARC Racing

18 LB Valve Springs (Pair) Fits Honda GX200, Predator 212 Non-Hemi

Fits Honda GX200 18 LB Valve Spring. Although this spring is not legal for the box stock classes, it offers another option for those looking for that "magic" combination.These springs will fit most 6.5 OHV engines, but NOT the Predator 212 Hemi (60363)...

$10.00

Add to Cart
Quick view

OMB Warehouse

212cc Jet Kit Predator Tillotson Ducar

Jet kit for Fits Honda GX200, 196cc Clone, and Predator 212 engines. Includes a 140 emulsion tube and two jets: .036" and .037". If your engine runs poorly, or on half choke after upgrading your Air Filter and Exhaust, this Kit will most likely solve...

$18.50

Add to Cart
Quick view

OMB Warehouse

1/4'' to 3/16'' Fuel Tank to Carb Adapter 212cc 196cc 6.5HP

If you run a remote tank or you've removed your stock gas tank on a Predator 212cc, 196cc or other 6.5HP type engine this adapter allows you to run standard 1/4" fuel line to this adapter, and then use new or existing 3/16" fuel line to connect to your...

$1.39

Add to Cart
Quick view

ARC Racing

Side Cover Gasket - Fits Honda GX200 / Clone / Hemi 212

Fits Honda GX200 / Clone / Predator HEMI 212 Side Cover GasketDoes NOT fit 2009 Harbor Freight or Homier

$2.50

Add to Cart
Quick view

ARC Racing

(2) Pack of 22Lb Valve Springs

2 Pack of 22Lb Valve Springs.These springs are recommended for use with the stock retainers. 22lbs @ .850"

$9.99

Add to Cart
Quick view

ARC Racing

Intake Insulator to Cylinder Head Gasket

BSP Clone GX200 Predator 212 Intake Insulator to Cylinder Head Gasket. Fits most 6.5HP engines

$0.84

Add to Cart
Quick view

NR RACING

Carb Float Bowl Gasket for Predator 212cc Fits Honda GX200 196cc 6.5HP

This is the stock O-Ring for the float bowl on both the Huayi and RuiXing Clone carbs.

$1.44

Add to Cart
Quick view

OMB Warehouse

Go Kart Weiner Pipe AKRA Legal w/ Standard Muffler Predator 212cc

AKRA legal Weiner Pipe for Fits Honda , Clones, and Predator Engines. Fits GX160, GX200, Clones, and Predator 212cc motors. Weenie pipe comes with a standard, non-restricted, screw-on muffler! THIS IS A SMALL DIAMETER AKRA SPEC PIPE FOR GO KART RACING An...

$29.95

$24.95

Add to Cart
Quick view

OMB Warehouse

Throttle Clevis & Spring

Throttle Clevis & Spring

$2.21

Add to Cart
Quick view

ARC Racing

Stock Crank Seal BSP Clone GX200 Predator 212

BSP Clone GX200 Predator 212 stock crank seal. Works on either side of the crankshaft

$2.40

Add to Cart
Quick view

OMB Warehouse

Muffler Exhaust Flange for Predator 212cc / BSP Fits Honda Clone 196cc

Fits Honda /Clone/Predator 212cc Laser Cut FlangeFits Honda /Clone Laser Cut Exhaust FlangeApproximate Measurements:Center Hole ID: 1"Center to Center of Bolt Holes: 1-3/4"Laser cut from 1/4" plate

$5.00

$1.50

Add to Cart
Quick view

OMB Warehouse

Breather Kit for Billet Air Filters Predator 212 Clone GX200 BSP

Vent your fuel tank and valve cover when using the popular billet air filter kits! This kit includes a breather for the fuel tank and one for the valve cover. A zip tie is included for the valve cover breather hose. This fits all popular Predator, Clone,...

$13.99

$9.99

Add to Cart
Quick view

ARC Racing

Non-EPA Carburetor for Fits Predator 212cc Fits Honda GX200 6.5HP Hisun

BSP/Clone/GX200/Hisun/Fits Predator 212 Replacement Carburetor This is the stock NON-EPA type carb for the BSP/Ducar Clone engines. Nothing has been altered or changed on these carbs. The stock .028" main and .016" pilot jet are in this carb. Fits Honda...

$29.95

Add to Cart
Quick view

ARC Racing

Carb & Intake Gasket - 196cc BSP / Clone / Predator 212

This OEM gasket for the BSP/Clone engine goes between the stock carburetor and the black intake insulator. An extra gasket is needed if a restrictor plate is used.

$1.50

Add to Cart
Quick view

OMB Warehouse

Angled Air filter 3-1/2" x 4" x 2-7/16"

Fabric Air Filter The standard angled air filter used in most 4 cycle karting engines. 3-1/2" x 4" with a 20 degree angle. The inside diameter of the mounting flange is 2-7/16". Most OHV kart engines will require an angled air filter! 3-1/2" X...

$22.12

$10.84

Add to Cart
Quick view

OMB Warehouse

Throttle Linkage Kit - Predator 212cc NON-Hemi Fits Honda 196cc BSP 6.5HP

Throttle linkage kit that fits Predator 212 NON-Hemi engines as well as GX160 GX200/196cc Clone. This kit is for ungoverned engines only.*Will not work with the Predator, Tillotson, Ducar, or WildCat hemi engines due to the difference in valve cover. The...

$10.36

$9.87

Add to Cart
Quick view

OMB Warehouse

Walbro FPC-1 Fuel Pump

Genuine Walbro FPC-1 fuel pump for 1/4" hose

$31.71

$29.95

Add to Cart
Quick view

ARC Racing

3720 ARC #35 Chain Break

ARC Precision Chain Break for #35 chain. Made in Albany Ga. The finest chain break on the market.

$22.00

Add to Cart
Quick view

ARC Racing

Exhaust Gasket Fits Honda Clone 196cc 6.5HP

Fits Honda GX140, GX160, GX200 - Box Stock Project Exhaust Header GasketDOES NOT FIT Predator engine without modification.

$2.00

Add to Cart
Quick view

OMB Warehouse

Breather Filter 12mm

This valve cover breather filter is perfect for use when adding an aftermarket air filter to the Clone, Fits Honda , BSP, and Predator engines. Rubber end has a 12mm opening.

$9.99

Add to Cart
Quick view

1" Header Sleeve Woven Material

Thermal sleeving capable of withstanding 1100 degree Fahrenheit continuous. This non-flammable sleeve has a special weave that allows it to expand and contract over fittings. In addition, it has that old school sleeve look with modern heat shield...

$8.99

Add to Cart
Quick view

NR RACING

4 Degree Offset Key

Offset Flywheel Key for GX200 / GX160 / Clones / Predator Offset Flywheel Key for GX200 / GX160 / Clones / Predator These keys are extremely popular and a favorite for racers using our 6619 and 6625 flywheels that want to adjust and tune timing for...

$10.50

Add to Cart
Quick view

Mikuni

Mikuni Throttle Bracket Predator 212 Ghost GX200 Clone

Finally, there is a way to use a vintage throttle and a Mikuni carb! This bracket bolts to the side cover of most 6.5HP OHV engines, such as the Predator 212, GX200, and Clones. Perfect for minibikes and go karts. Once bolted to the side cover you can...

$19.99

$19.95

Add to Cart
Quick view

ARC Racing

Carburetor Stud for GX200 196cc Clones Pred 212 224 Tillotson

Carburetor Stud for GX200 / Clones / Ducar / Tillotson / Predator / WildCat / 6.5 HP variant OHV Clone engines This is the longer stud you need for Predator 212 non-Hemi engines to mount an aftermarket air filter. This stud is approx 115mm - 4-1/2" long.

$2.16

$1.89

Add to Cart
Quick view

OMB Warehouse

Throttle Cable Clevis

Throttle Cable Clevis - Includes allen wrench

$2.50

Add to Cart
Quick view

ARC Racing

Carb. Throttle Rod & Spring

Carb. Throttle Rod & Spring Stock item for CloneAlso fits Baja MB200 - replaces MB200-341 and MB200-342 governor rod and governor spring.Carb. Throttle Rod & Spring Stock item for Clone

$3.00

Add to Cart
Quick view

OMB Warehouse

Mini Bike Pipe w/ Muffler - Under seat style

Tighter bend pipe that shoots straight behind a mini bike underneath your seat. Comes with a screw on muffler. For Fits Honda Clone GX160, GX200, Predator 212cc. Perfect for mini bikes so the pipe doesn't burn your leg. 8" clearance from motor mount to...

$47.95

$37.95

Add to Cart
Quick view

DynoCams

Dyno Cams CM 265 HOT Grind Super X - Hemi 212cc GX200 196cc

Dyno "CM" Modified Superbox Cam for Fits Honda GX200, Predator 212 HEMI, or BSP Clone 6.5 with bored stock carb or tilly carb.* This cam provides .265" lift at the cam, which works out to .275" lift with the stock rockers.* Intake duration is 236 and...

$58.95

Add to Cart
Quick view

ARC Racing

Valve Cover Gasket For GX200 / Clone / Predator 3rd Gen Non-Hemi Engines

Valve cover gasket replacement for GX200 / Clone / Predator 212 3rd Generation Non-Hemi engines. This does NOT fit 2009 Harbor Freight engine

$2.04

Add to Cart
Quick view

OMB Warehouse

Air Filter Kit for Predator 301cc 420cc and GX240/270/340/390 Engines

Air filter adapter kit for 8-16HP OHV Clone engines (1) Air Filter (1) Adapter to fit GX240, GX270, GX340, GX390 and Predator 301 & 420 (1) Choke hold bracket (1) Gasket Airflow increase is so significant that your engines may require a carburetor...

$38.99

Add to Cart
Quick view

ARC Racing

ARC 6057 Billet Sidecover fits GX200/Clone Tillotson Predator Hemi, Ghost, and 224

The long anticipated Billet Sidecover for the GX200/Clone 196 and Predator Hemi, Ghost, Tillotson 212 Engine has arrived. It has the attention to detail and good looks that have come to be expected of ARC's billet products. It features side by side dual...

$149.95

$149.50

Add to Cart
Quick view

Exhaust Stud Kit

Replacement Exhaust Studs and Flanged Nuts.

$4.29

Add to Cart
Quick view

NR RACING

6 Degree Offset Key

Offset Flywheel Key for GX200 / GX160 / Clones / Predator Offset Flywheel Key for GX200 / GX160 / Clones / Predator These keys are extremely popular and a favorite for racers using our 6619 and 6625 flywheels that want to adjust and tune timing for...

$8.59

Add to Cart
Quick view

ARC Racing

Standard Stock Flywheel key

Standard Stock Flywheel key Fits Fits Honda GX160/200/240/270/390 Predator 196/212/301/420 196cc Clones and many other Chinese OHV engines

$4.22

$3.89

Add to Cart
Quick view

ARC Racing

ARC 6619 Billet Flywheel For GX200 Clone Tillotson 212 Predator 224 NON-Hemi Ghost

ARC Racing SFI certified Billet Aluminum Flywheel 6619 for GX200/Clone Clone 196cc, Ducar 196/212 and Tillotson 196/225/228/236, WildCat 223, Predator Ghost 212 and Predator 224cc NON Hemi Engines. Weighs 3.5lbs and has a special designed...

$120.00

$119.50

Add to Cart
Quick view

Predator

.020" Pilot Jet predator 212 GX200 Clone

Suggested for Race Carbs For use with Open Element Air Filter on Std Bore Carb, Gas .020" Stock Carbs use .016" Will not fit the SP brand carbs

$5.99

Add to Cart
Quick view

OMB Warehouse

Briggs Raptor Throttle Kit

Throttle linkage kit for Briggs & Stratton Raptor and Pulsa-Jet carb 5 HP engines. This kit will not work with the later "fixed jet" carbs that have the two air filter threaded holes at the top of the intake

$8.21

Add to Cart
Quick view

OMB Warehouse

Foam Pre-Filter Red 3-1/2"x5"

$2.41

Add to Cart
Quick view

New Fits Predator 212cc Upgraded Air Filter Kit

This is the newest version of our Fits Predator performance air filter kit. The kit comes with the following: K&N style angled air filter 3-1/2" x 4" ARC billet aluminum air filter adapter, Made in the USA Outwears pre-filter in black Bored...

$45.11

Add to Cart
SPECIAL ORDER: 10+

Quick view

RLV

RLV 5348C Exhaust Header Pipe GX200 Clone Predator 212

RLV EXF5060 Header. 1" pipe with 2 stages to 1-5/16" This pipe is intended for use on racing go karts. It may fit other applications Fits Predator 212cc and Clone 196cc Engines, Box Stock Project. RLV Header Pipe

$35.89

$34.95

Add to Cart
Quick view

ARC Racing

(2) Pack of GX240/GX390/Predator 420 Heavy Duty 50# Valve Springs

2 Pack of Heavy Duty Valve Springs for Honda GX240, GX270, GX340, & GX390.Approx 50 lbs at 1.125 installed height, 42lbs at 1.2, with 110 lb open pressure (.375 lift).

$12.99

Add to Cart
Quick view

Rotary Corp

3/4" Npt Muffler - Screw In

Rotary Corp brand aftermarket product. Fits 9, 9B, 9F, 9R, 100200 series, 130200, 131200 series (5 hp horizintal), 170400 series (7 hp horizontal), 170700, 171700 series, 190400 to 190799 (8 hp horizontal), 1954-series (8 hp horizontal.Fits 9, 9B, 9F,...

$14.76

$7.49

Add to Cart
Quick view

ARC Racing

Intake Valve Seal Clone GX200 196cc Clone

Stock OEM intake valve seal. Clone/GX200 as well as the Predator 212 Non-Hemi Engines with 5.5mm valve stems.

$2.28

Add to Cart
Quick view

ARC Racing

"140" Emulsion Tube Predator 212 196cc Clone GX200

This E-tube has a slightly larger main bore and less air bleed holes providing a better fuel signal at the jet. Improves performance accross the RPM range, but especially on bottom end and mid range. You will want a main jet between .035" and .037"...

$6.99

Add to Cart
Quick view

Outerwears

Outerwears Prefilter, 3-1/2" x 4" (Black)

A simple, inexpensive way to protect your engine without sacrificing horsepower. Pre-Filters are made from high quality materials with a welded seam for strength. They will work on any exposed air filter and will NOT void your warranty. Guaranteed to...

$18.98

$13.28

Add to Cart
Quick view

ARC Racing

(2) Stainless Steel Push Rod GX200 Clone BSP Predator 212 non-hemi

New Stainless Steel Pushrods for the BSP/Clone/GX200/ non-Hemi Predator Engines. Stock Length. Price is for 2 pushrods

$7.69

Add to Cart
Quick view

OMB Warehouse

Strut Mount Catch Tank

1-5/8" x 4". Made from billet aluminum. Hardware included. For use with 1/4" x 3/8" fuel line.

$17.40

Add to Cart
Quick view

ARC Racing

HP Valve Spring Retainer & Keeper Locks for 5.5mm Stems

Fits 5.5mm valve stem and our HP valve springs. To be used with our stainless valves. Will not fit stock valves. For use with springs up to 26#s Sold in singles, so you will need two.

$11.00

$10.99

Add to Cart
Quick view

Plasti-Gauge

Use to measure to measure rod clearance.

$5.49

Add to Cart
Quick view

Outside the Frame Staged Header GX200 Predator 212 196cc Clone

Mini-Bike pipes that exits to the left side. Great for applications where there is not enough between tire and seat for Center Pipe.Pipe is flared to 1 5/16" for use with RLV 1 5/16" Mufflers. Can also be used w/o a muffler for maximum performance and...

$29.99

Add to Cart
Quick view

Mikuni

50" Throttle Cable Mikuni End

50" total length cable with barrel and slide carb ends

$15.95

$12.95

Add to Cart
Quick view

ARC Racing

Push Rod Guide Plate

Guide Plate for 1.3 Rockers Required for use with 1.3 ratio Stamped Rockers (Part # ARC_DJ-1100) For use on Hona GX160/GX200, 196cc Clones, and Predator 212 Non-Hemi engines.

$11.95

Add to Cart
Quick view

ARC Racing

Stock Main Crankshaft Bearing 196cc Clone GX200 Predator 212

This is a much better bearing than what comes in a clone engine. Visually identical to the standard bearing, but they roll WAY better. These are not ceramic or coated or anything that would be considered illegal, they are just a higher quality bearing at...

$6.99

Add to Cart
Quick view

Mikuni Carb Kit - Round Slide 22mm - GX200 & Fits Predator 212

22mm Round Slide Mikuni Kit, Small Body, Gas. Low buck way of adding HP! This carb is not a Japanese Mikuni. These are Chinese carbs produced under license from Mikuni. INCLUDES 22mm Mikuni Round Slide Carb Intake Manifold/adapter Air...

$99.95

Add to Cart
Quick view

ARC Racing

ARC Billet Oil Cap for ARC Billet Sidecovers

Billet Oil Fill Cap w/ o-ring Fits ALL ARC Billet sidecovers only This will NOT work in the following engines Tecumseh Briggs and Stratton Predator Honda Ducar Tillotson Clinton Lauson Powerfist PowerHorse Carroll...

$9.00

Add to Cart
Quick view

RLV

1" RLV Exhaust Silencer

1" RLV Exhaust Silencer. Slip-on fit for 1" headers. Use RLV_4140 to complete installation RLV Enviro-Safe 4-cycle silencers are WKA legal & IKF approved. Designed to reduce noise (4 dB to 6 dB) and backfire of the 4 cycle engine, not the horsepower.

$45.95

$45.25

Add to Cart
Quick view

ARC Racing

Choke Assembly Bracket

This little bracket bolts to the back of our billet air filter adapter to keep the choke lever in place. Without the stock air box, or this little device, the choke lever will pop off. This bracket requires the odd-shaped, thick, rubber-coated metal...

$3.00

Add to Cart
Quick view

Sidecover Gasket .020" Clone BSP Predator 212 HEMI

.020" Thick Sidecover gasket for the GX200 Clone BSP and Predator 212 HEMI engines

$2.00

Add to Cart
Quick view

OMB Warehouse

Race Ready Mega Jet Kit

Mega jet kit for Fits Honda clone, GX160, GX200, Predator 212cc, GX340, GX390, Predator 420cc, and other engines. Includes (1) each of the following jets: .034, .035, .036, .037, .038, .039, .040, .041, .042. Stock jets on GX200s are .028. Stock jets on...

$24.99

Add to Cart
Quick view

RLV

RLV Stock 1 5/16" Muffler (BP)

RLV 4104 "Stock" muffler (B91XL 1-5/16") Comes with a clamp for the support bracket only. No clamp for the muffler to pipe is included

$47.99

$46.99

Add to Cart
Quick view

NR RACING

2 Degree Offset Key

Offset Flywheel Key for GX200 / GX160 / Clones / Predator Offset Flywheel Key for GX200 / GX160 / Clones / Predator These keys are extremely popular and a favorite for racers using our 6619 and 6625 flywheels that want to adjust and tune timing for...

$10.50

Add to Cart
Quick view

Rotary Corp

Ring Compressor

Rotary Corp brand aftermarket product. For cylinders 1-1/2" to 3" diameter. Made of blued spring steel. Leaves warehouse in 1-2 business days.

$18.95

Add to Cart
Quick view

OMB Warehouse

Throttle Clevis 2-Piece

Throttle Clevis 2-Piece Aluminum

$4.35

Add to Cart
Quick view

ARC Racing

Flywheel/Starter Cup Nut Clone GX200 Predator 212 Tillotson

This is a standard stock replacement nut for the flywheel of the Clone, Hnda GX200, Predator 212, Tillotson 196/212, and most Chinese 6.5 HP engines. It is flanged and designed for maximum hold when tightened.

$2.25

Add to Cart
Quick view

DynoCams

PVL Aluminum Flywheel - 196cc Clone GX200 Tillotson Predator 224 Ghost

The PVL Flywheel for Clone is NOW available for use with STOCK COIL Engine: Clone 196cc, Fits Honda GX160/200, Tillotson, WildCat 223, Ducar 212, Predator 224, Predator GhostMaterial: Diecast AluminumWeight: 3.8 lbsTiming: 28 Deg.Fins: 12 Coil gap to be...

$87.95

Add to Cart
Quick view

Billet Valve Cover Spacer GX200 Predator 212 Non-Hemi

Valve Cover Spacer allows roller rockers to clear Valve Cover Baffle. Tapped for pulse fitting to run fuel pumps or venting Includes bolts, gasket, Pulse fitting, and Plug (if pulse fitting not needed) Spacer is 0.600" thick

$32.99

Add to Cart
Quick view

ARC Racing

Rocker Assembly (Non-Hemi)

Will NOT fit GX200 because the rocker stud has a different thread pitch.Will fit Predator head.

$5.99

Add to Cart
Quick view

OMB Warehouse

3' Foot 1/4" ID X 3/8" Fuel Gas Line Blue Minibike Go Kart Trike ATV UTV Cycle

3' Length Of 1/4" ID X 3/8" OD Blue Fuel Line This premium vinyl fuel line will work for your various outdoor power equipment. Special formula, vinyl gas and oil tubing for mini bikes, go karts, chain saws, small engines, snowmobiles, mowers etc...

$9.99

$7.00

Add to Cart
Quick view

ARC Racing

Thin Sidecover Gasket .012" GX200 Clone Predator Hemi 212

New, Thinner Sided Cover Gasket for Clone GX200 Predator 212 HEMI Engines. .012" Thick Tighten up crank end play or stack with standard gasket to increase crank end play.

$2.00

Add to Cart
Quick view

OMB Warehouse

Air Filter 3" x 4" x 1-1/4" Fabric Angled fits Predator Ghost

Angled Fabric Air Filter 3'' x 4'' 1-1/4'' Inner Diameter Fits Briggs Animal

$20.85

$11.68

Add to Cart
Quick view

ARC Racing

On/Off Switch DJ-1203

Original Stock Part On / Off Switch for GX200 / Clone Engines

$2.58

Add to Cart
Quick view

RLV

.037" #93 Main Jet Fits Honda Clone Predator Carbs

.037" main jets for Predator Engines, Fits Honda Clone Engines, Box Stock Engines, and other Chinese Clones. These can be used as replacements for stock or upgrades in performance applications.Predator 212cc, 301cc, 420cc 6.5HP, 8.0HP, 11HP, 13HPFits...

$3.50

Add to Cart
Quick view

ARC Racing

(2) Cut to Length Chrome Moly Pushrods, 3/16" Fits Predator 212 GX200 Clone

*Depending on availability, pushrods may be black anodized or uncoated. This is a pair of the "Do It Yourself" pushrod kit which features a 5.75" long shaft with 2 ball type ends. The rods are made from .188" diameter X .035" wall, 4130 heat treated...

$32.99

$29.95

Add to Cart
Quick view

ARC Racing

ARC 6394 Rod Bearing For Billet Rods For GX200 Clone Engines

ARC Rod Bearing replacements for Fits Honda and Clone Engines. For use on the ARC6270 Rod as well as the ARC_6271, ARC_6268, ARC_6264, and ARC_6263 Rods.

$24.00

Add to Cart
Quick view

Economy Clone GX200 Predator 212 Hemi Black Top Plate

Economy Black, lower cost model for the Clone / GX200 / Predator 212 HEMI Engines.Mounting Bolts included with purchase. A clevis for the inner cable is NOT included.

$26.38

Add to Cart
Quick view

24 mm Mikuni Flat Slide Carb Kit, Gas, GX200, Predator 212

24 mm Mikuni Flat Slide Carb Kit, Gas, GX200, Predator 212, 196cc Clone, Ducar 212 Kit includes Genuine Mikuni 24mm Flat Slide carb Intake Manifold/adapter Air Filter Air Filter Adapter/velocity stack Hose Clamps Note: This a Square Slide carb which is...

$211.00

$209.99

Add to Cart
Quick view

ARC Racing

ARC 6383 HP Rod Bolt Set 1/4-28x1.25

ARC Rod Bolt Set, 1-1/4" LG HD This rod bolt set is made from top quality materials, the bolts are high tensile strength. In the pictures, the threads are enclosed in plastic tubing for protection. Torque bolts to 170 in/lbs.

$14.99

Add to Cart
Quick view

DynoCams

MOD2 Grind, 196cc Clone GX200 Cheater Cam

Mod 2 Cheater Stock Cam for Fits Honda GX200, BSP, or Blue Clone 6.5 HP engines. This cam meets the lift specs only of a stock cam. It has significantly more duration than the CL-1 cam giving more overall power. This cam WILL NOT pass a duration or...

$57.99

Add to Cart
Quick view

RLV

Muffler, Open Modified 1 5/16"

1-5/16'' Modified RLV Exhaust Silencer RLV Enviro-Safe 4-cycle silencers are WKA legal & IKF approved. Designed to reduce noise (4 dB to 6 dB) and backfire of the 4 cycle engine, not the horsepower. Modified and open Comes with a clamp for the...

$45.95

Add to Cart
Quick view

OMB Warehouse

Throttle Linkage Kit with Fuel Pump Mount Predator 212 GX200 Clone

Predator 212cc Engine Throttle Linkage Kit with Walbro Fuel Pump Mount. This Linkage Kit is designed to work with ungoverned engines requiring use of a billet flywheel and removal of the stock gas tank.

$35.65

Add to Cart
Quick view

ARC Racing

Throttle Linkage Top Plate for Predator 212cc Hemi Honda GX200 Clone

ARC top plate/throttle mechanism is CNC machined from 1/8" aluminum plate so you know it looks great. The integrated throttle mechanism is adjustable to maximize foot pedal travel giving you more precise throttle control. Designed for simple and quick...

$34.95

Add to Cart
Quick view

ARC Racing

Valve Cover w/Pulse Fitting

Fits Honda GX200 / Clone / Predator 212 NON-Hemi Valve Cover with pulse fitting Item is as pictured. This valve cover retains the stock breather port in the stock location. Does not fit engines with 5 valve cover bolts

$9.30

Add to Cart
Quick view

DynoCams

CS Grind, Clone Core Cam - Clone & Predator Hemi

Agressive ramp cam for Modified class motor.Can use stock carb with this cam. Does require upgraded spring package.Billet rod and flywheel strongly recommended.Agressive ramp cam for Modified class motor.Can use stock carb with this cam. Does require...

$54.75

Add to Cart
Quick view

DynoCams

32LB Dual Valve Spring Set with Hardware, Clone

32LB Dual Valve Spring Set with HardwarePredator, Clone These are for use with 5.5mm valve stems

$46.99

Add to Cart
Quick view

NR RACING

Chrome Moly Pushrod, 3/16" 5.160" Fits Predator 212 GX200 Clone

Heavy Duty Chrome Moly 3/16"Push rod, 5.160" Length. Considerably stiffer than stock. Use with all HD springs. Capable of 10,000 RPM ALL PUSH RODS ARE SOLD INDIVIDUALLY. YOU MUST ORDER 2 PER MOTOR The following are recommendations only and may not...

$15.99

Add to Cart
Quick view

ARC Racing

Oil Drain Plug GX160 GX200 Clone BSP Predator 212

Oil Drain plug with washer. Fits GX160 GX200 Clone BSP and Predator 212 engines.

$2.00

Add to Cart
Quick view

Clone 196cc/GX200 Stock Crankshaft

BSP Clone 196cc (GX200 Chinese replacement) stock crankshaft (2.125"-2.129" Stroke). Crank has a 3/4" snout for use with common clutches and torque converters The governor gear is not on this crank. You will need to use the stock governor gear from your...

$34.95

Add to Cart
Quick view

ARC Racing

Intake Manifold Insulator GX200 Clone Predator 212

Intake Manifold Insulator Stock item for Clone / GX200 / Predator 212

$3.00

Add to Cart
Quick view

ARC Racing

Chain Guard/Heat Shield

This Chain Guard/Heat Shield is the perfect addition to a Box Stock, BP, Outlaw engine. The sturdy thermal shield is positioned to help prevent contact between your shoulder and the header, even when you lean on it in the turns. Works with any of the...

$49.50

Add to Cart
Quick view

140 E-tube + .036 Jet

140 E-Tube & .036 (#9 / 91) Jet for Predator 212cc, Fits Honda Clone GX160, GX200 and other clones. Also fits Box Stock Project. The jet size will vary with your modifications to your engine. The larger the jet, the more fuel you'll get!

$12.99

Add to Cart
Quick view

ARC Racing

Air Filter Adapter Predator 212cc GX200 196cc

Funneled air filter adapter for the Clone/GX200 Engines. Choke lever bracket included.

$14.00

Add to Cart
Quick view

ARC Racing

Gasket, Carb / Intake GX390

Fits Honda Original Parts 16221-ZF6-800 Carb to Intake Gasket for the GX390 Engine

$1.49

Add to Cart
Quick view

ARC Racing

ARC 6272 Billet Rod Honda GX340/390 Predator 420 4.41"

ARC billet stock replacement connecting rod for the Honda GX390 and Predator 420. 4.410" center to center for a 1.416" crank pin and a .788" wrist bore. Manufactured from domestic 7075-T651 aluminum and uses 5/16" rod bolts designed and produced by ARP...

$149.95

$149.50

Add to Cart
Quick view

NR RACING

10 Degree Offset Key

Offset Flywheel Key for GX200 / GX160 / Clones / Predator Offset Flywheel Key for GX200 / GX160 / Clones / Predator These keys are extremely popular and a favorite for racers using our 6619 and 6625 flywheels that want to adjust and tune timing for...

$7.99

$7.49

Add to Cart
Quick view

ARC Racing

BSP / Clone Exhaust Lash Cap

BSP/Clone Exhaust Lash Cap

$3.20

Add to Cart
Quick view

OMB Warehouse

Governor Removal Kit For GX200 and 196cc Clone Engines

Removing the governor on your stock engine can be done safely and easily with the matched components in this kit! We have included a PVL flywheel, billet connecting rod, 18# valve springs, and all the gaskets needed to remove the governor on your GX200,...

$179.99

Add to Cart
Quick view

ARC Racing

(2) Pack of 36Lb Valve Springs

For Modified BSP, Clone, GX200, Predator 212, and Yamaha F200. 36lbs at .850 installed height and coil bind at .450. Requires part number ARC_DJ-1046 retainer and keeper kit. May require head modification when used on a Predator 212 Hemi.

$13.99

Add to Cart

Small Engine Performance parts for Predator, Briggs, Honda, Box Stock 196cc & Clone Engines. Replacement parts, Stage Kits and more.

window.SPECIAL_ORDER_API_URL = window.SPECIAL_ORDER_API_URL || 'https://local.ombwarehouse.com/api/special-order-stock/check';