ARC Racing

The new "660" Drag series billet flywheel for the Honda GX200, Clone 196, Ducar 196/212, Tillotson 196/212, Predator Ghost 212 and Predator 224cc engines from ARC Racing. Features a finless drag...

All sizes of main jets for Predator Engines, Honda Clone Engines, Box Stock Engines and other Chinese Clones. These can be used as replacements for stock or upgrades in performance applications...

Predator 212cc Hemi 25mm Exhaust Valve (Hemi OEM replacement). This 25mm exhaust valve has a 5.5mm stem and works with stock type retainers

*Depending on availability, pushrods may be black anodized or uncoated. This is a pair of the "Do It Yourself" pushrod kit which features a 5.75" long shaft with 2 ball type ends. The rods are made...

New Stainless Steel Pushrods for the BSP/Clone/GX200/ non-Hemi Predator Engines. Stock Length. Price is for 2 pushrods

Kit contains two .1mm shims and two .2mm shims

Fits Honda GX390 Oil Seal

GX390 Insulator to Head Gasket

Kit contains two .1 mm shims and two .2 mm shims

Rubber Valve Cover Gasket For The BSP Clone 196cc Engines. Seal better and last longer than the traditional cork gaskets. "May" work on the newest Gen3 Predator 212cc engines with 27/25 valves and...

Crank Bearing for our 6057 and 6058 Sidecovers

Thick rubber air box to carb gasket for the GX390 and Predator 301/420cc engines

The new 6689 billet flywheel from ARC Racing has an ultra low drag fin design that will greatly reduce air drag on your AKRA racing engine, while still moving enough air for cooling. Less air drag on...

2 Pack of Heavy Duty Valve Springs for Honda GX240, GX270, GX340, & GX390.Approx 50 lbs at 1.125 installed height, 42lbs at 1.2, with 110 lb open pressure (.375 lift).

2 Pack of 22Lb Valve Springs.These springs are recommended for use with the stock retainers. 22lbs @ .850"

2 Pack of 26Lb "White" Springs. Use as intake spring when using stock intake valve and ARC DJ-1046 Spring retainer. Use as Heavy spring for intake and exhaust when using our stainless (DJ-1121,22 and...

GX200/Clone/Predator 212 Stock Ignition Coil Bolt

BSP / Clone Stock Rocker Arm

Original Stock Part On / Off Switch for GX200 / Clone Engines

Standard Stock Flywheel key Fits Fits Honda GX160/200/240/270/390 Predator 196/212/301/420 196cc Clones and many other Chinese OHV engines

ARC Rod Bolt Set, 1-1/4" LG HD This rod bolt set is made from top quality materials, the bolts are high tensile strength. In the pictures, the threads are enclosed in plastic tubing for protection...

plastic fan for flywheel fits GX200 Honda, Clone 196cc & 212 Predators May require modification for Predator 212 stock flywheels Can be used with the 6602 Ultra Lite flywheels when running...

Everything you need to upgrade your Predator 212 Hemi or Predator 224 Max Performance to stainless valves. Comes with stock size (27mm & 25mm with 5.5mm Stems) stainless valves, keepers and...

ARC billet +.040" long connecting rod for the Honda GX390, Predator 420, and 13-16HP Clones. You must verify crank and piston pin size! 4.450" center to center for a 1.416" crank pin...

GX390 Dual Valve Spring SetGX390 Dual Valve Spring Set65lbs at 1.125" installed height. 60lbs at 1.2" installed height.

Billet aluminum flywheel for the electric start Fits Honda GX200, 196cc Clone, and Tillotson engines. Built from 6061-T6 aluminum features a powerful rare earth magnet and a replaceable 7075-T6...

GX200/Clone Sidecover Dowell Pin, Solid 8mm x 16mm by Burris