ARC Racing

DJ-18-930 3-Staged J-Pipe Header I.D. .930" for the GX200/Clone/ Predator 212cc/ Predator 224CCThis header is designed to fit the Honda/ Clone/ Predator engines. Uses RLV 1-5/16 Silencers

The new "660" Drag series billet flywheel for the Honda GX200, Clone 196, Ducar 196/212, Tillotson 196/212, Predator Ghost 212 and Predator 224cc engines from ARC Racing. Features a finless drag...

Predator 212cc Head Gasket .009" thick

*Depending on availability, pushrods may be black anodized or uncoated. This is a pair of the "Do It Yourself" pushrod kit which features a 5.75" long shaft with 2 ball type ends. The rods are made...

Kit contains two .1 mm shims and two .2 mm shims

Crank Bearing for our 6057 and 6058 Sidecovers

Predator MLS head gasket .027" thick by 70mm(2.756") bore. MLS stands Multi Layer Steel. MLS head gaskets feature embossed stainless steel Viton coated outer layers for excellent sealing and...

Predator MLS head gasket .018" thick by 70mm(2.756") bore. MLS stands Multi Layer Steel. MLS head gaskets feature embossed stainless steel Viton coated outer layers for excellent sealing and...

The new 6689 billet flywheel from ARC Racing has an ultra low drag fin design that will greatly reduce air drag on your AKRA racing engine, while still moving enough air for cooling. Less air drag on...

2 Pack of 22Lb Valve Springs.These springs are recommended for use with the stock retainers. 22lbs @ .850"

2 Pack of 26Lb "White" Springs. Use as intake spring when using stock intake valve and ARC DJ-1046 Spring retainer. Use as Heavy spring for intake and exhaust when using our stainless (DJ-1121,22 and...

14x1.5mm Extended Starter Nut for Honda /196 Clone / Predator 212 and Yamaha, 66.5mm long

GX200/Clone/Predator 212 Stock Ignition Coil Bolt

Standard Stock Flywheel key Fits Fits Honda GX160/200/240/270/390 Predator 196/212/301/420 196cc Clones and many other Chinese OHV engines

GX200/Clone Sidecover Dowell Pin, Solid 8mm x 16mm by Burris

2ft .070 Buna-n O-Ring for our 6052,6057 and 6058 Billet Sidecovers

This flywheel puller is designed for those who don't want to use the "knocker" method to remove their flywheel. Works with: ALL ARC Flywheels with Steel Adjustable Timing Hubs PVL Clone...

This is the Standard, Stock Steel Head Gasket for the Predator 212cc engine. Measures .009"-.010". May require modification to the dowell pin holes to fit the Hemi engine.

This is a Stock OEM Predator Fiber Head Gasket with Fire Ring approx .040" thick.

ARC uses these fittings to install in the Clone's Valve Cover in order to Pulse the Fuel Pump. We sell the Valve Cover with the fitting already installed as well.

New, Thinner Sided Cover Gasket for Clone GX200 Predator 212 HEMI Engines. .012" Thick Tighten up crank end play or stack with standard gasket to increase crank end play.

The long anticipated Billet Sidecover for the GX200/Clone 196 and Predator Hemi, Ghost, Tillotson 212 Engine has arrived. It has the attention to detail and good looks that have come to be expected...

Billet Oil Fill Cap w/ o-ring Fits ALL ARC Billet sidecovers only This will NOT work in the following engines Tecumseh Briggs and...

This is a much better bearing than what comes in a clone engine. Visually identical to the standard bearing, but they roll WAY better. These are not ceramic or coated or anything that would be...

Stock Coil fits BSP, 196cc Clone. GX160/GX200, Predator 212, and Predator 173cc vertical shaft engines

ARC Racing SFI certified Billet Aluminum Flywheel 6619 for GX200/Clone Clone 196cc, Ducar 196/212 and Tillotson 196/225/228/236, WildCat 223, Predator Ghost 212 and Predator 224cc NON Hemi Engines...

Starter Nut replacement Fits Honda /Clone and Yamaha 14 X 1.5 mm engines

BSP Clone GX200 Predator 212 stock crank seal. Works on either side of the crankshaft