Quick view DynoCams RPM Limited Coil 5250 RPMs Predator 212 GX200 196cc Clone The 212-1260R is a rev limiting ignition coil that will be utilized in the Ducar 212cc Hobby Classes. The rev limiter coil allows you to remove the factory governor so the engines will run more... $30.00 Add to Cart
Quick view DynoCams 310 Grind, Welded Lobe GX200 196cc Clone, Hemi Predator 212 DescriptionThe 310 is a monster camshaft with low lift. This cam has all the duration of our bigger cams, but with .310" lift so ratio rockers can be used in OHV modified applications. This cam... $112.99 Add to Cart
Quick view DynoCams CL2 Grind, Retarded 2 Degrees, Clone, Hemi DescriptionDesigned in 2013, the intake and exhaust lobes allow the CL-2 to run at higher RPMs before the engine goes into uncontrolled valve float. By retarding the cam 2 degrees the power band is... $46.99 Add to Cart
Quick view DynoCams CL4 GRIND, NKA LEGAL, CLONE, HEMI, BUFFED The CL4 is specifically designed for the NKA rule package. With no minimum duration requirements, we were able to smooth the nose of the cam allowing it to rev well into the 7000 RPM range. The CL4... $48.95 Add to Cart
Quick view DynoCams 255 Grind Gx200 Clone BSP Predator 212 Hemi The 255 is a great choice for cheater stock or mild modified. You can expect a 1 to 1.5 hp gain in the upper RPM range over a legal stock grind.This cam is welded for durability and comes with a... $109.99 Add to Cart
Quick view DynoCams PVL Aluminum Flywheel - 196cc Clone GX200 Tillotson Predator 224 Ghost The PVL Flywheel for Clone is NOW available for use with STOCK COIL Engine: Clone 196cc, Fits Honda GX160/200, Tillotson, WildCat 223, Ducar 212, Predator 224, Predator GhostMaterial: Diecast... $87.95 Add to Cart
Quick view DynoCams CS Grind, Clone Core Cam - Clone & Predator Hemi Agressive ramp cam for Modified class motor.Can use stock carb with this cam. Does require upgraded spring package.Billet rod and flywheel strongly recommended.Agressive ramp cam for Modified class... $54.75 Add to Cart
Quick view DynoCams CL-216 Grind, Clone Core Cam The CL-216 cam has an aggressive ramp and requires an upgraded spring package, billet rod, and flywheel. A stock carb can be used with this cam.The CL-216 cam has an aggressive ramp and requires an... $58.95 Add to Cart
Quick view DynoCams 275 Grind, Welded Lobe Clone Core Cam This cam is to be used in mild modified applications. It will require an upgraded spring package, billet rod, and billet flywheel.This cam is to be used in mild modified applications. It will require... $112.99 Add to Cart
Quick view DynoCams Valve Cover; Clone/GX200 Stock Item is as pictured. Does not fit engines with 5 valvecover bolts. $5.95 Add to Cart
Quick view DynoCams Clone/GX200 Stainless Steel Push Rod New Stainless Steel Pushrods for the Clone/GX200 Engines. Sold Separately. Stock Length. $4.22 Add to Cart
Quick view DynoCams MOD2 Grind, 196cc Clone GX200 Cheater Cam Mod 2 Cheater Stock Cam for Fits Honda GX200, BSP, or Blue Clone 6.5 HP engines. This cam meets the lift specs only of a stock cam. It has significantly more duration than the CL-1 cam giving more... $57.99 Add to Cart
Quick view DynoCams Dyno Cams CM 265 HOT Grind Super X - Hemi 212cc GX200 196cc Dyno "CM" Modified Superbox Cam for Fits Honda GX200, Predator 212 HEMI, or BSP Clone 6.5 with bored stock carb or tilly carb.* This cam provides .265" lift at the cam, which works out to .275" lift... $58.95 Add to Cart
Quick view DynoCams Dynocams CL-1 Improved Racing Cam For 196cc 6.5HP Engines The CL1 Improved has a more retarded centerline for optimal top end horsepower.Engine: 196cc OHV CloneRecommended Class: StockTarget (MAX) RPM: 6000-6500Spring Pressure (In / Ex): 10.8 lbsValve... $47.95 Add to Cart
