ARC Racing

2ft .070 Buna-n O-Ring for our 6052,6057 and 6058 Billet Sidecovers

This flywheel puller is designed for those who don't want to use the "knocker" method to remove their flywheel. Works with: ALL ARC Flywheels with Steel Adjustable Timing Hubs PVL Clone...

Add on parts kit for the Hionda GX160 GX200, Predator 212 Hemi, and 196cc/208cc/212cc, 224cc Clones engines. The kit includes: Cable Clevis #2100D Top plate/throttle hookup #DJ-1145B ARC Billet air...

Stainless Steel valve, 25MM face, 5.5MM stem, stock length This valve head measures 25mm and are top quality. It has a radius-type keeper groove. This Valve will not work with stock retainers...

Will NOT fit GX200 because the rocker stud has a different thread pitch.Will fit Predator head.

BSP / Clone Stock Push Rod Guide.

You must have a lash cap DJ-1050 with this retainer. Fits Honda GX200/clone and Gen1 Non hemi Predator 212.

Oversize Intake Valve 27mm Stainless HP. Top Quality, radius type keeper groove. Fits stock valve guide and seat. Use ARC # DJ-1046 HP Valve Spring Retainers.

The "Red Stripe" spring is the strongest 10.8 lb spring on the market. This Heavy-Duty spring will allow the engine builder to custom fit their spring to their particular build. Having been through a...

The long anticipated Billet Sidecover for the GX200/Clone 196 and Predator Hemi, Ghost, Tillotson 212 Engine has arrived. It has the attention to detail and good looks that have come to be expected...

ARC billet stock replacement connecting rod for the Honda GX390 and Predator 420. 4.410" center to center for a 1.416" crank pin and a .788" wrist bore. Manufactured from domestic 7075-T651...

Billet SFI Certified flywheel model for the Fits Honda GX340 and GX390, Predator 420, and 13-16HP Clone engines. The keyway is fixed in the stock position and the stock pull starter can be used. No...

Adjustable Hub Flywheel fits Honda GX340/390, Predator 420, and most 13-16HP Clone engines The ARC Billet Flywheels are CNC machined from 6061 T-6 Aluminum. It weighs 5.40 lbs. The main feature of...

This is a stock Honda Replacement Carb for the GX340/390 Engines. Also fits predator 420 and most 13HP Clone engines. Honda Part# 16100-Z1C-801 Gaskets are not included. Use (1) ARC_DJ-3320...

Fits Honda Original Parts 16221-ZF6-800 Carb to Intake Gasket for the GX390 Engine

Billet Oil Fill Cap w/ o-ring Fits ALL ARC Billet sidecovers only This will NOT work in the following engines Tecumseh Briggs and...

The Max Stroke Crank from BSP allows the maximum stroke per the AKRA/NKA rules. These cranks will average 2.130 - 2.133" stroke and have a flame hardened journal. Crank has a 3/4" snout for use with...

Carb. Throttle Rod & Spring Stock item for CloneAlso fits Baja MB200 - replaces MB200-341 and MB200-342 governor rod and governor spring.Carb. Throttle Rod & Spring Stock item for Clone

This is a much better bearing than what comes in a clone engine. Visually identical to the standard bearing, but they roll WAY better. These are not ceramic or coated or anything that would be...

New and Improved Air Filter Adapter for GX200 / Clone Engines from ARC (height 1.365") *Meets AKRA/WKA Box Stock and BP rules for air filter adapter. *Testing shows a marked increase in air flow and...

Guide Plate for 1.3 Rockers Required for use with 1.3 ratio Stamped Rockers (Part # ARC_DJ-1100) For use on Hona GX160/GX200, 196cc Clones, and Predator 212 Non-Hemi engines.

Stock Coil fits BSP, 196cc Clone. GX160/GX200, Predator 212, and Predator 173cc vertical shaft engines

Carburetor Stud for GX200 / Clones / Ducar / Tillotson / Predator / WildCat / 6.5 HP variant OHV Clone engines This is the longer stud you need for Predator 212 non-Hemi engines to mount an...