ARC Racing

6615 Drag PVL Finless Flywheel designed for the Junior Dragster Engines. It has an adjustable hub that allows timing changes at 1 degree increments in as little as 90 seconds without the use of...

This is the .002" undersized standard bearing used on the flathead Briggs. Used on a slightly worn crank. This bearing is also used on many stroker rods for other engines such as the Animal and GX200...

 High Quality and Performance in a Head Gasket for Briggs 5hp Flathead Raptor Engines

High Quality and Performance in a Head Gasket for Briggs 5hp Flathead Raptor Engines

.032" Copper Head Gasket for Briggs  Blockzilla 2

.032" Copper Head Gasket for the Briggs Blockzilla 3

Set of Valve Seats utilizing the 6140 and the 6142 Seats

Stainless Steel Exhaust Valve for Briggs 5hp flathead. 1.125" Hd x 3.850" long x .248"stem.

Our Full length, special bronze alloy split valve guides, for the Briggs Model 13, 5hp flathead, are a must when your looking for superior oil retention and maximum resistance to wear. .310" O.D.(for...

 .010 Valve Spring Shim

 .005 Valve Spring Shim

PVL ignition coil 555681 has a 12,000 RPM limit! For use on Animal, World Formula, and with the ARC PVL billet flywheels. You must use the specific PVL flywheel with this coil  

2 Pack of Stock Appearing Valve Springs for the Briggs Animal

Billet Head with fins for Open Modified with Big ValvesPopular with anyone wanting maximum flow in their 5 hp BriggsMachined from 6061 T-6 Aluminum

S300 - 25ccARC Billet Cylinder Heads for the Briggs Flathead is made from 6061 T-6 Aluminum.These heads were designed for maximum heat retention, which is a desirable trait for Junior Dragsters...

S325 27ccARC Billet Cylinder Heads for the Briggs Flathead is made from 6061 T-6 Aluminum.These heads were designed for maximum heat retention, which is a desirable trait for Junior Dragsters...

Stock Appearing Valve Spring for the Briggs Animal

High Performance Dual Valve Spring Set for the Briggs Animal

ARC Rod Bolt Set, 1-1/4" LG HD This rod bolt set is made from top quality materials, the bolts are high tensile strength. In the pictures, the threads are enclosed in plastic tubing for protection...

3.281" Animal "Short-Lite Stock Rod" with bearing inserts. 3.281" Animal "Short-Lite Stock Rod" with bearing inserts. This is a .006" shorter version of our popular 6247 "Lite" stock length billet...

  ARC Billet Sidecover, Briggs Animal Includes cam bearing support, upper oil fill, lower oil level check port, side mounted oil drain plug, threaded bosses for easy removal, and a full...

ARC Billet Dual Bearing Sidecover kit for Briggs Animal ARC Billet Dual Bearing Sidecover kit for Briggs AnimalDesigned for specifically for the Animal stroker application. By placing two bearings...

Rod BearingIntek V Twin

Connecting Rod Bolts with Washers These bolts are 1/4-28 x 1" long 12 point. 170,000 lb tensile strength C37 Rockwell ATSM spec bolt. For use in the ARC stock length Fits Briggs 5hp flathead rods...

ARC Billet Connecting Rod, Briggs Flathead Stock Replacement ARCs Enduro SeriesCNC Machined from aircraft grade 7075 T-651 Aluminum and have been tested to an average of 12,500 rpmARC Billet...

Top Plate Linkage KitTop Plate Linkage Kit designed for ARC Racing top plates. Everything you need to hook up your throttle cable.

Wrist Pin for Briggs 796172 Piston Assembly (Model 31) and Briggs 792307 Piston Assembly (Model 28) as well as others.

Piston Assembly for the Model 28 Briggs with Rings and Circlips. Also works in the Briggs Model 46 opposed twin with the ARC billet opposed twin connecting rods. 3.44"(87.3mm) bore size. Requires...