ARC Racing

*Depending on availability, pushrods may be black anodized or uncoated. This is a pair of the "Do It Yourself" pushrod kit which features a 5.75" long shaft with 2 ball type ends. The rods are made...

New Stainless Steel Pushrods for the BSP/Clone/GX200/ non-Hemi Predator Engines. Stock Length. Price is for 2 pushrods

Kit contains two .1mm shims and two .2mm shims

Predator MLS head gasket .018" thick by 70mm(2.756") bore. MLS stands Multi Layer Steel. MLS head gaskets feature embossed stainless steel Viton coated outer layers for excellent sealing and...

ARC Precision Chain Break for #35 chain. Made in Albany Ga. The finest chain break on the market.

High Quality and Performance in a Head Gasket for Briggs 5hp Flathead Raptor Engines

Oil Drain plug with washer. Fits GX160 GX200 Clone BSP and Predator 212 engines.

Thick rubber air box to carb gasket for the GX390 and Predator 301/420cc engines

2 Pack of Heavy Duty Valve Springs for Honda GX240, GX270, GX340, & GX390.Approx 50 lbs at 1.125 installed height, 42lbs at 1.2, with 110 lb open pressure (.375 lift).

2 Pack of 22Lb Valve Springs.These springs are recommended for use with the stock retainers. 22lbs @ .850"

For Modified BSP, Clone, GX200, Predator 212, and Yamaha F200. 36lbs at .850 installed height and coil bind at .450. Requires part number ARC_DJ-1046 retainer and keeper kit. May require head...

2 Pack of 26Lb "White" Springs. Use as intake spring when using stock intake valve and ARC DJ-1046 Spring retainer. Use as Heavy spring for intake and exhaust when using our stainless (DJ-1121,22 and...

1.3 ratio GX200 / Clone Billet Steel Rocker SetReplaces the stock rockers with 1.3:1 ratio billet steel rocker arms, heavy duty billet steel rocker studs, lash caps, rocker pivots, adjuster nuts, set...

New and Improved 1.3 Ratio Roller Tip Rockers for the Clone and Fits Honda GX160/200/Predatro 212 NON-Hemi Engines Precision machined from chromoly steel with hardened roller tips and shafts. Dyno...

Original Stock Part On / Off Switch for GX200 / Clone Engines

ARC Rod Bolt Set, 1-1/4" LG HD This rod bolt set is made from top quality materials, the bolts are high tensile strength. In the pictures, the threads are enclosed in plastic tubing for protection...

This is the spec purple .500" restrictor plate for a Jr 1 or Rookie restricted Box Stock Class.

Everything you need to upgrade your Predator 212 Hemi or Predator 224 Max Performance to stainless valves. Comes with stock size (27mm & 25mm with 5.5mm Stems) stainless valves, keepers and...

Comes with stock size(25mm & 24mm) stainless valves, keepers and retainers, valve springs(26lb) and lash caps. Everything you need to upgrade your GX200/Clone/1st Generation Predator 212 to...

Top Plate Linkage KitTop Plate Linkage Kit designed for ARC Racing top plates. Everything you need to hook up your throttle cable.

Billet aluminum flywheel for the electric start Fits Honda GX200, 196cc Clone, and Tillotson engines. Built from 6061-T6 aluminum features a powerful rare earth magnet and a replaceable 7075-T6...

ARC's SFI certified billet aluminum flywheel for the Briggs and Stratton vertical crankshaft Intek V-Twin models 40 & 44 engine often used in lawnmower racing. The 6611 flywheels are designed as...

Billet stock replacement rod for the Tecumseh HM100. Machined in the USA from 7075-T6 aluminum. 3.95" center to center with a 1.377" crank pin bore and a .688" wrist pin bore. Includes bearing and...

Add on parts kit for the Hionda GX160 GX200, Predator 212 Hemi, and 196cc/208cc/212cc, 224cc Clones engines. The kit includes: Cable Clevis #2100D Top plate/throttle hookup #DJ-1145B ARC Billet air...

Stainless Steel valve, 25MM face, 5.5MM stem, stock length This valve head measures 25mm and are top quality. It has a radius-type keeper groove. This Valve will not work with stock retainers...