ARC Racing

Adjustable Hub Flywheel fits Honda GX340/390, Predator 420, and most 13-16HP Clone engines The ARC Billet Flywheels are CNC machined from 6061 T-6 Aluminum. It weighs 5.40 lbs. The main feature of...

This is a stock Honda Replacement Carb for the GX340/390 Engines. Also fits predator 420 and most 13HP Clone engines. Honda Part# 16100-Z1C-801 Gaskets are not included. Use (1) ARC_DJ-3320...

Fits Honda Original Parts 16221-ZF6-800 Carb to Intake Gasket for the GX390 Engine

Billet Oil Fill Cap w/ o-ring Fits ALL ARC Billet sidecovers only This will NOT work in the following engines Tecumseh Briggs and...

The Max Stroke Crank from BSP allows the maximum stroke per the AKRA/NKA rules. These cranks will average 2.130 - 2.133" stroke and have a flame hardened journal. Crank has a 3/4" snout for use with...

ARC Stock length billet rod with bearing inserts for the Briggs Flathead 5HP EngineARC Stock length billet rod with bearing inserts for the Briggs Flathead 5HP Engine 3.875" center-to-center. Uses...

Carb. Throttle Rod & Spring Stock item for CloneAlso fits Baja MB200 - replaces MB200-341 and MB200-342 governor rod and governor spring.Carb. Throttle Rod & Spring Stock item for Clone

This is a much better bearing than what comes in a clone engine. Visually identical to the standard bearing, but they roll WAY better. These are not ceramic or coated or anything that would be...

This kit includes the following:DJ-1320 Carb to intake insulator gasketDJ-1325 Intake insulator to head gasketDJ-1330 Header gasketDJ-1335 Valve cover gasketDJ-1340 Side cover gasketDJ-1315 Air box...

New and Improved Air Filter Adapter for GX200 / Clone Engines from ARC (height 1.365") *Meets AKRA/WKA Box Stock and BP rules for air filter adapter. *Testing shows a marked increase in air flow and...

Guide Plate for 1.3 Rockers Required for use with 1.3 ratio Stamped Rockers (Part # ARC_DJ-1100) For use on Hona GX160/GX200, 196cc Clones, and Predator 212 Non-Hemi engines.

Fits 5.5mm valve stem and our HP valve springs. To be used with our stainless valves. Sold in singles, so you will need two.

Carburetor Stud / Bolt for GX200 / Clones. This is the longer stud you need for Predator engines to mount an aftermarket air filter. This stud is approx 115mm - 4-1/2" long.

Std. .016 Low Speed Jet - RuiXing

ARC top plate/throttle mechanism is CNC machined from 1/8" aluminum plate so you know it looks great. The integrated throttle mechanism is adjustable to maximize foot pedal travel giving you more...

ARC Racing SFI certified Billet Aluminum Flywheel 6619 for GX200/Clone Clone 196cc, Ducar 196/212 and Tillotson 196/225/228/236, WildCat 223, Predator Ghost 212 and Predator 224cc NON Hemi Engines...

This OEM gasket for the BSP/Clone engine goes between the stock carburetor and the black intake insulator. An extra gasket is needed if a restrictor plate is used.

3.303" center-to-center for a 1.180" Fits Honda /Clone crank journal and .709" wrist pin. For use with the stock crankshaft and stock style (dished or flat top) piston in...

After racing the Box Stock class for years, we have never been fully satisfied with any clutch. Several have done a great job but each lacked something that the other had. What we wanted was an...

BSP Clone GX200 Predator 212 stock crank seal. Works on either side of the crankshaft

This little bracket bolts to the back of our billet air filter adapter to keep the choke lever in place. Without the stock air box, or this little device, the choke lever will pop off. This bracket...