ARC Racing

Oversize Intake Valve 27mm Stainless HP. Top Quality, radius type keeper groove. Fits stock valve guide and seat. Use ARC # DJ-1046 HP Valve Spring Retainers.

The "Red Stripe" spring is the strongest 10.8 lb spring on the market. This Heavy-Duty spring will allow the engine builder to custom fit their spring to their particular build. Having been through a...

The long anticipated Billet Sidecover for the GX200/Clone 196 and Predator Hemi, Ghost, Tillotson 212 Engine has arrived. It has the attention to detail and good looks that have come to be expected...

Billet Oil Fill Cap w/ o-ring Fits ALL ARC Billet sidecovers only This will NOT work in the following engines Tecumseh Briggs and...

The Max Stroke Crank from BSP allows the maximum stroke per the AKRA/NKA rules. These cranks will average 2.130 - 2.133" stroke and have a flame hardened journal. Crank has a 3/4" snout for use with...

Carb. Throttle Rod & Spring Stock item for CloneAlso fits Baja MB200 - replaces MB200-341 and MB200-342 governor rod and governor spring.Carb. Throttle Rod & Spring Stock item for Clone

This is a much better bearing than what comes in a clone engine. Visually identical to the standard bearing, but they roll WAY better. These are not ceramic or coated or anything that would be...

New and Improved Air Filter Adapter for GX200 / Clone Engines from ARC (height 1.365") *Meets AKRA/WKA Box Stock and BP rules for air filter adapter. *Testing shows a marked increase in air flow and...

Guide Plate for 1.3 Rockers Required for use with 1.3 ratio Stamped Rockers (Part # ARC_DJ-1100) For use on Hona GX160/GX200, 196cc Clones, and Predator 212 Non-Hemi engines.

Stock Coil fits BSP, 196cc Clone. GX160/GX200, Predator 212, and Predator 173cc vertical shaft engines

Carburetor Stud for GX200 / Clones / Ducar / Tillotson / Predator / WildCat / 6.5 HP variant OHV Clone engines This is the longer stud you need for Predator 212 non-Hemi engines to mount an...

ARC top plate/throttle mechanism is CNC machined from 1/8" aluminum plate so you know it looks great. The integrated throttle mechanism is adjustable to maximize foot pedal travel giving you more...

This is a untouched, Stock E-Tube from the BSP Engine

Heavy rubber coated gasket that goes between the airbox or air filter adaptor and the stock carburetor

ARC Racing SFI certified Billet Aluminum Flywheel 6619 for GX200/Clone Clone 196cc, Ducar 196/212 and Tillotson 196/225/228/236, WildCat 223, Predator Ghost 212 and Predator 224cc NON Hemi Engines...

This OEM gasket for the BSP/Clone engine goes between the stock carburetor and the black intake insulator. An extra gasket is needed if a restrictor plate is used.

BSP Clone GX200 Predator 212 stock crank seal. Works on either side of the crankshaft

This little bracket bolts to the back of our billet air filter adapter to keep the choke lever in place. Without the stock air box, or this little device, the choke lever will pop off. This bracket...

Billet aluminum air filter adapter funneled and ported for the carburetor air orifices. Backside is pre-drilled for the ARC_DJ-1257 choke hold bracket Approximate Measurements: Distance from...

Fits Honda GX200 / Clone / Predator HEMI 212 Side Cover GasketDoes NOT fit 2009 Harbor Freight or Homier

Valve cover gasket replacement for GX200 / Clone / Predator 212 3rd Generation Non-Hemi engines. This does NOT fit 2009 Harbor Freight engine

Fits Honda GX140, GX160, GX200 - Box Stock Project Exhaust Header GasketDOES NOT FIT Predator engine without modification.

BSP Clone GX200 Predator 212 Intake Insulator to Cylinder Head Gasket. Fits most 6.5HP engines

BSP/Clone Exhaust Lash Cap

Fits Honda GX200 18 LB Valve Spring. Although this spring is not legal for the box stock classes, it offers another option for those looking for that "magic" combination.These springs will fit most 6...

This E-tube has a slightly larger main bore and less air bleed holes providing a better fuel signal at the jet. Improves performance accross the RPM range, but especially on bottom end and mid range...