ARC Racing

*Depending on availability, pushrods may be black anodized or uncoated. This is a pair of the "Do It Yourself" pushrod kit which features a 5.75" long shaft with 2 ball type ends. The rods are made...

New Stainless Steel Pushrods for the BSP/Clone/GX200/ non-Hemi Predator Engines. Stock Length. Price is for 2 pushrods

Predator MLS head gasket .018" thick by 70mm(2.756") bore. MLS stands Multi Layer Steel. MLS head gaskets feature embossed stainless steel Viton coated outer layers for excellent sealing and...

2 Pack of 26Lb "White" Springs. Use as intake spring when using stock intake valve and ARC DJ-1046 Spring retainer. Use as Heavy spring for intake and exhaust when using our stainless (DJ-1121,22 and...

1.3 ratio GX200 / Clone Billet Steel Rocker SetReplaces the stock rockers with 1.3:1 ratio billet steel rocker arms, heavy duty billet steel rocker studs, lash caps, rocker pivots, adjuster nuts, set...

New and Improved 1.3 Ratio Roller Tip Rockers for the Clone and Fits Honda GX160/200/Predatro 212 NON-Hemi Engines Precision machined from chromoly steel with hardened roller tips and shafts. Dyno...

Original Stock Part On / Off Switch for GX200 / Clone Engines

Flat top piston for the "Hemi" Predator engine. This 70mm(2.756") piston comes complete with rings, .709" OD wrist pin, and clips. This piston has an approximately .020" shorter compression height...

ARC Rod Bolt Set, 1-1/4" LG HD This rod bolt set is made from top quality materials, the bolts are high tensile strength. In the pictures, the threads are enclosed in plastic tubing for protection...

Billet aluminum flywheel for the electric start Fits Honda GX200, 196cc Clone, and Tillotson engines. Built from 6061-T6 aluminum features a powerful rare earth magnet and a replaceable 7075-T6...

Will NOT fit GX200 because the rocker stud has a different thread pitch.Will fit Predator head.

BSP / Clone Stock Push Rod Guide.

This is a Stock OEM Predator Fiber Head Gasket with Fire Ring approx .040" thick.

New, Thinner Sided Cover Gasket for Clone GX200 Predator 212 HEMI Engines. .012" Thick Tighten up crank end play or stack with standard gasket to increase crank end play.

This is a much better bearing than what comes in a clone engine. Visually identical to the standard bearing, but they roll WAY better. These are not ceramic or coated or anything that would be...

New and Improved Air Filter Adapter for GX200 / Clone Engines from ARC (height 1.365") *Meets AKRA/WKA Box Stock and BP rules for air filter adapter. *Testing shows a marked increase in air flow and...

Guide Plate for 1.3 Rockers Required for use with 1.3 ratio Stamped Rockers (Part # ARC_DJ-1100) For use on Hona GX160/GX200, 196cc Clones, and Predator 212 Non-Hemi engines.

Fits 5.5mm valve stem and our HP valve springs. To be used with our stainless valves. Will not fit stock valves. For use with springs up to 26#s Sold in singles, so you will need two.

ARC Racing SFI certified Billet Aluminum Flywheel 6619 for GX200/Clone Clone 196cc, Ducar 196/212 and Tillotson 196/225/228/236, WildCat 223, Predator Ghost 212 and Predator 224cc NON Hemi Engines...

This OEM gasket for the BSP/Clone engine goes between the stock carburetor and the black intake insulator. An extra gasket is needed if a restrictor plate is used.

3.303" center-to-center for a 1.180" Fits Honda /Clone crank journal and .709" wrist pin. For use with the stock crankshaft and stock style (dished or flat top) piston in...

BSP Clone GX200 Predator 212 stock crank seal. Works on either side of the crankshaft

Valve cover gasket replacement for GX200 / Clone / Predator 212 3rd Generation Non-Hemi engines. This does NOT fit 2009 Harbor Freight engine

Fits Honda GX140, GX160, GX200 - Box Stock Project Exhaust Header GasketDOES NOT FIT Predator engine without modification.

3.313" center-to-center for a 1.180" Honda/Clone crank journal and .709" wrist pin. For use with the stock crankshaft and stock style (dished or flat top) piston in modified...