ARC Racing

2 Pack of 26Lb "White" Springs. Use as intake spring when using stock intake valve and ARC DJ-1046 Spring retainer. Use as Heavy spring for intake and exhaust when using our stainless (DJ-1121,22 and...

Predator MLS head gasket .018" thick by 72mm(2.835") bore. MLS stands Multi Layer Steel. MLS head gaskets feature embossed stainless steel Viton coated outer layers for excellent sealing and...

1.3 ratio GX200 / Clone Billet Steel Rocker SetReplaces the stock rockers with 1.3:1 ratio billet steel rocker arms, heavy duty billet steel rocker studs, lash caps, rocker pivots, adjuster nuts, set...

New and Improved 1.3 Ratio Roller Tip Rockers for the Clone and Fits Honda GX160/200/Predatro 212 NON-Hemi Engines Precision machined from chromoly steel with hardened roller tips and shafts. Dyno...

***MUST USE WITH DJ-1070CM PUSH RODS. Rocker Arms, Roller tip for the Habor Freight Hemi Predator 212 from NR Racing. Machined from chrome moly steel in 1.2/1 ratio. Hardened roller tips and...

New and Improved 1.2 Ratio Roller Tip Rockers for the Clone and Fits Honda GX160/200/Predator 212 NON-Hemi Precision machined from chromoly steel with hardened roller tips and shafts. Dyno tested to...

The Gage Black Venom Roller Rocker Arms are a high-quality component designed to enhance the performance of your engine. Fits Honda GX160/GX200, Predator 212/224 Non-Hemi, 196cc Clones, and Tillotson...

14x1.5mm Extended Starter Nut for Honda /196 Clone / Predator 212 and Yamaha, 66.5mm long

SFI certified billet aluminum flywheel for Kohler CH270 or the hemi head Harbor Freight Predator 212cc engine (cast aluminum valve cover). Harbor Freight model #60363. The keyway is fixed and the...

BSP Header Stud Nut

BSP Stock Head Bolt

GX200/Clone/Predator 212 Stock Ignition Coil Bolt

Header stud Fits Honda Clone and Predator engines

BSP / Clone Stock Rocker Arm

Carb float. This is a stock replacement part for Clone / GX200 engines.

Original Stock Part On / Off Switch for GX200 / Clone Engines

Standard Stock Flywheel key Fits Fits Honda GX160/200/240/270/390 Predator 196/212/301/420 196cc Clones and many other Chinese OHV engines

Stock replacement valve cover gasket for the Predator HEMI 212cc engine.

Flat top piston for the "Hemi" Predator engine. This 70mm(2.756") piston comes complete with rings, .709" OD wrist pin, and clips. This piston has an approximately .020" shorter compression height...

Ultra-Light SFI Certified Billet Aluminum Flywheel for the Predator Hemi Weighs 1.75 LBS Stock Diameter, Lightest Flywheel Available. This flywheel is made from same quality materials and with the...

Ultra-Light SFI Certified Billet Aluminum Flywheel for the Predator 212. Weighs 1.75 LBS Stock Diameter, Lightest Flywheel Available. Fits the old style non "hemi" head Predator 212 with tin sheet...

ARC_6607-P 5-3/4" Diameter Predator FlywheelThis new ARC billet, SFI Certified flywheel utilizes the same outer body of our standard billet 6607 flywheel, but it has been fitted...

ARC +.040" long rod to utilize the Hemi Predator flat top piston (ARC_DJ-1285PH) in a non-hemi Predator engine (WILL NOT WORK IN HEMI BLOCK without modification). 3.343" center to center for a 1.188"...

The New ARC Predator 212 "Drop In" long rod does not require cutting down the top of the Wiseco piston! This rod measures 3.595" center to center for a 1.188" crank pin with .490" wrist pin and is...

1/4" Allen wrench to use with our ARC6934 air filter adapter.

ARC Rod Bolt Set, 1-1/4" LG HD This rod bolt set is made from top quality materials, the bolts are high tensile strength. In the pictures, the threads are enclosed in plastic tubing for protection...