ARC Racing

Rod Bolt Set, 1" LG HP Torque bolts to 170 in/lbs

Billet aluminum flywheel for the electric start Fits Honda GX200, 196cc Clone, and Tillotson engines. Built from 6061-T6 aluminum features a powerful rare earth magnet and a replaceable 7075-T6...

Billet Flywheel for the Subaru Pull-Start EX 21 Engine. * 4.2 LBS * SFI Certified * Super Strong Rare Earth Neodymium Magnet * Stock Timing

6621 flywheel for the PVL ignition. Non-Adjustable, Finned Flywheel for the GX200 / Clone 196cc / Tillotson 196/212/225/238/236 Engines WILL NOT work with OEM ignition. Requires a 555681 PVL...

Billet Flywheel for Fits Honda GX160, GX200, & 196ccBSP(clone), Tillotson, Ducar, WildCat 223 w/ adjustable timing.Our billet SFI Certified flywheel with adjustable timing for the Fits Honda...

6611-VG for the Briggs Vanguard Fits V-Twin, Mod 30, Mod 35, Mod 38We Recommend Using the #808726 Starter for these Applications. Coil Brackets Included with Purchase and Mounting Hardware

ARC's SFI certified billet aluminum flywheel for the Briggs and Stratton vertical crankshaft Intek V-Twin models 40 & 44 engine often used in lawnmower racing. The 6611 flywheels are designed as...

Stroker Animal Flywheel Hub  

SFI certified billet flywheel for the Briggs 5hp flathead. 5-3/4" diameter(3hp) adjustable timing flywheel with rare earth magnets for a hotter spark. Timing set at 23 BTDC with 14 degrees...

ARC Billet Flywheels are CNC machined from 6061 T-6 aluminum. The Rare earth magnets (Neodymium) produce up to 17% more voltage at the coil. 30 degrees timing built into keyway. May require #5990...

ARC 6603-GX200 Honda Flywheel Features:Requres #5982 Coil Bracket-2.90 pounds-ARC's Signature indexed adjustable hub, which allows easy timing / ignition changes- 14deg. of timing adjustment, from...

SFI certified billet aluminum 3 hp diameter flywheel for Jr Dragster engines (no fins). The keyway is in the stock position when the flywheel's indexed adjustable timing hub is set to the negative...

SFI certified billet aluminum 3 hp(5-3/4") diameter flywheel for Jr Dragster engines (no fins). The keyway is installed to advance the ignition timing to 30 ° BTDC. The flywheel weighs 2.7 lbs and...

ARC's new light weight Animal stroker flywheel for the Briggs PVL ignition. At 1.6lbs it is the lightest flywheel on the market for instant throttle response. SFI certified. Must be used with the...

ARC's new light weight Animal flywheel for the Briggs PVL ignition. At 1.6lbs it is the lightest flywheel on the market for instant throttle response. SFI certified. Must be used with the Briggs PVL...

ARC's new light weight Fits Honda GX200/196cc clone flywheel for the Fits Briggs PVL ignition. At 1.6lbs it is the lightest flywheel on the market for instant throttle response. SFI certified...

Billet stock replacement rod for the Tecumseh HM100. Machined in the USA from 7075-T6 aluminum. 3.95" center to center with a 1.377" crank pin bore and a .688" wrist pin bore. Includes bearing and...

Billet Connecting Rod 5.175 Briggs Vertical Model 28. This rod reqiures the removal of .050" material from the top of the piston. Inspection of piston is needed to assure there is sufficient...

ARCs Pro Series Billet Rod for the Subaru EX21 is 3.595" and it was designed to be a OEM stock replacement rod if used with the stock piston.Pro Series Rods are CNC machined from aircraft grade...

3.625" Animal "Stroker" Rod with bearing inserts.ARC's +.237 stroker rod is designed to give you the most rod length you can get with the stock block and either an ARC 6580 Billet Crankshaft or a...

ARC Billet Connecting Rod Designed to be used in the models 40 and 44 Intek V-Twins with the Vertical Shaft. It is stock length and was designed to be used with stock pistons. They are CNC Machined...

Billet Rod 4.235" INTEK 305 StrokerStroker for JE pistons with 3" to 3.25" bore.Rod bolt torque: 170 in/lbs lubricated

Billet Rod ARC Pro Series. This rod is a stock replacement for the Briggs Intek 305 Model 20 engine but requires .062" to be machined off the top of the piston. Featuring ARC's trademark forced oil...

Billet Rod ARC Pro Series. This rod is a stock replacement for the Briggs Intek 305 Model 20 engine. Featuring ARC's trademark forced oil dipper. CNC machined from aircraft grade 7075-T651 aluminum...

Billet Rod ARC Enduro Series CNC Machined from aircraft grade 7075 T-651 aluminum. Our 1" Stroker Rods are designed to handle the rigors of todays high horsepower Junior Dragster and open...

Hardened billet crank gear for the Briggs 5hp Raptor flathead. 1.005" I.D

Starter Nut for Flathead 5/8 x 18 thread pitch Stubby