ARC Racing

Chain Break Replacement Bolt without pinBolt has been machined to work properly with tool. The end of the bolt has been machined to keep chain pins where they need to be during use. You can see in...

Chain Break Replacement Bolt W/Pin

Rear Wheel Hub ARC_9030Billet Hub with 4/4 pattern (4 holes on a 4" circle) for 1 1/4" axlePrecision machined from 6061 T-6 aluminum Use part # 741253 for the studs and nuts

TECH KIT FEATURES:  Contains - Main Jet .042 No-Go Gauge; -Pilot Jet .019 No-Go Gauge; -Emulsion Tube .066 No-Go GaugeBox Stock Project : Carburetor - Choke Bore .810 No-Go Gauge   -...

This Bracket designed to check Cam lift in Clone engines. It uses a Dial Indicator (not included)  

 High Quality and Performance in a Head Gasket for Briggs 5hp Flathead Raptor Engines

High Quality and Performance in a Head Gasket for Briggs 5hp Flathead Raptor Engines

.032" Copper Head Gasket for Briggs  Blockzilla 2

.032" Copper Head Gasket for the Briggs Blockzilla 3

Set of Valve Seats utilizing the 6140 and the 6142 Seats

Stainless Steel Exhaust Valve for Briggs 5hp flathead. 1.125" Hd x 3.850" long x .248"stem.

Our Full length, special bronze alloy split valve guides, for the Briggs Model 13, 5hp flathead, are a must when your looking for superior oil retention and maximum resistance to wear. .310" O.D.(for...

ARC Rear Wheel Hub Assembly features 2 choices of bolt sizes that may be used with it. One combination of 4 bolt holes is threaded for 110mm bolts and the other takes 115mm. CNC Machined from...

For Jr Dragsters and Lawnmower Racers (4) 1/2-20 x1-1/2" Long Bolts (4) Flanged Nuts

 .010 Valve Spring Shim

 .005 Valve Spring Shim

6615 Drag PVL Flywheel. For use with the Fits Briggs and Stratton digital PVL ignition system on the Fits Honda GX200/196cc Clone, Tillotson 196/212/225/228/236 engines. Finnless Flywheel designed...

Oil Drain plug with washer. Fits GX160 GX200 Clone BSP and Predator 212 engines.

Thick rubber air box to carb gasket for the GX390 and Predator 301/420cc engines

PVL ignition coil 555681 has a 12,000 RPM limit! For use on Animal, World Formula, and with the ARC PVL billet flywheels. You must use the specific PVL flywheel with this coil  

The new 6689 billet flywheel from ARC Racing has an ultra low drag fin design that will greatly reduce air drag on your AKRA racing engine, while still moving enough air for cooling. Less air drag on...

2 Pack of Stock Appearing Valve Springs for the Briggs Animal

2 Pack of Heavy Duty Valve Springs for Honda GX240, GX270, GX340, & GX390.Approx 50 lbs at 1.125 installed height, 42lbs at 1.2, with 110 lb open pressure (.375 lift).

2 Pack of 22Lb Valve Springs.These springs are recommended for use with the stock retainers. 22lbs @ .850"

For Modified BSP, Clone, GX200, Predator 212, and Yamaha F200. 36lbs at .850 installed height and coil bind at .450. Requires part number ARC_DJ-1046 retainer and keeper kit. May require head...

2 Pack of 26Lb "White" Springs. Use as intake spring when using stock intake valve and ARC DJ-1046 Spring retainer. Use as Heavy spring for intake and exhaust when using our stainless (DJ-1121,22 and...

1.3 ratio GX200 / Clone Billet Steel Rocker SetReplaces the stock rockers with 1.3:1 ratio billet steel rocker arms, heavy duty billet steel rocker studs, lash caps, rocker pivots, adjuster nuts, set...