ARC Racing

This is the .002" undersized standard bearing used on the flathead Briggs. Used on a slightly worn crank. This bearing is also used on many stroker rods for other engines such as the Animal and GX200...

 .010 Valve Spring Shim

 .005 Valve Spring Shim

PVL ignition coil 555681 has a 12,000 RPM limit! For use on Animal, World Formula, and with the ARC PVL billet flywheels. You must use the specific PVL flywheel with this coil  

2 Pack of Stock Appearing Valve Springs for the Briggs Animal

Stock Appearing Valve Spring for the Briggs Animal

High Performance Dual Valve Spring Set for the Briggs Animal

ARC Rod Bolt Set, 1-1/4" LG HD This rod bolt set is made from top quality materials, the bolts are high tensile strength. In the pictures, the threads are enclosed in plastic tubing for protection...

3.281" Animal "Short-Lite Stock Rod" with bearing inserts. 3.281" Animal "Short-Lite Stock Rod" with bearing inserts. This is a .006" shorter version of our popular 6247 "Lite" stock length billet...

  ARC Billet Sidecover, Briggs Animal Includes cam bearing support, upper oil fill, lower oil level check port, side mounted oil drain plug, threaded bosses for easy removal, and a full...

ARC Billet Dual Bearing Sidecover kit for Briggs Animal ARC Billet Dual Bearing Sidecover kit for Briggs AnimalDesigned for specifically for the Animal stroker application. By placing two bearings...

Rod Bolt Set, 1" LG HP Torque bolts to 170 in/lbs

Stroker Animal Flywheel Hub  

ARC's new light weight Animal stroker flywheel for the Briggs PVL ignition. At 1.6lbs it is the lightest flywheel on the market for instant throttle response. SFI certified. Must be used with the...

ARC's new light weight Animal flywheel for the Briggs PVL ignition. At 1.6lbs it is the lightest flywheel on the market for instant throttle response. SFI certified. Must be used with the Briggs PVL...

3.625" Animal "Stroker" Rod with bearing inserts.ARC's +.237 stroker rod is designed to give you the most rod length you can get with the stock block and either an ARC 6580 Billet Crankshaft or a...

This Crank Gear is a must when using an ARC #6580 Crankshaft or a Briggs #555204(495645) Crank.This is the gear to use for the Animal Stroker. 1.005" I.D.

This is the standard .998" bearing used on the flathead Briggs with Aluminum babbit. This bearing is also used on many stroker rods for other engines such as the Animal and GX200. Our connecting rod...

Our most popular "Lite" stock length billet connecting rod for the Briggs and Stratton Animal engine. It includes ARP bolts and bearing inserts. Now legal in WKA. 3.287" Animal "Lite" Stock Rod with...