ARC Racing

This is the .002" undersized standard bearing used on the flathead Briggs. Used on a slightly worn crank. This bearing is also used on many stroker rods for other engines such as the Animal and GX200...

3.281" Animal "Short-Lite Stock Rod" with bearing inserts. 3.281" Animal "Short-Lite Stock Rod" with bearing inserts. This is a .006" shorter version of our popular 6247 "Lite" stock length billet...

Rod BearingIntek V Twin

Connecting Rod Bolts with Washers These bolts are 1/4-28 x 1" long 12 point. 170,000 lb tensile strength C37 Rockwell ATSM spec bolt. For use in the ARC stock length Fits Briggs 5hp flathead rods...

ARC Billet Connecting Rod, Briggs Flathead Stock Replacement ARCs Enduro SeriesCNC Machined from aircraft grade 7075 T-651 Aluminum and have been tested to an average of 12,500 rpmARC Billet...

Rod Bearing Briggs Boxer

Rod Bolt Set, 1" LG HP Torque bolts to 170 in/lbs

Billet Connecting Rod 5.175 Briggs Vertical Model 28. This rod reqiures the removal of .050" material from the top of the piston. Inspection of piston is needed to assure there is sufficient...

3.625" Animal "Stroker" Rod with bearing inserts.ARC's +.237 stroker rod is designed to give you the most rod length you can get with the stock block and either an ARC 6580 Billet Crankshaft or a...

ARC Billet Connecting Rod Designed to be used in the models 40 and 44 Intek V-Twins with the Vertical Shaft. It is stock length and was designed to be used with stock pistons. They are CNC Machined...

Billet Rod 4.235" INTEK 305 StrokerStroker for JE pistons with 3" to 3.25" bore.Rod bolt torque: 170 in/lbs lubricated

Billet Rod ARC Pro Series. This rod is a stock replacement for the Briggs Intek 305 Model 20 engine. Featuring ARC's trademark forced oil dipper. CNC machined from aircraft grade 7075-T651 aluminum...

Billet Rod ARC Enduro Series CNC Machined from aircraft grade 7075 T-651 aluminum. Our 1" Stroker Rods are designed to handle the rigors of todays high horsepower Junior Dragster and open...

This is the standard .998" bearing used on the flathead Briggs with Aluminum babbit. This bearing is also used on many stroker rods for other engines such as the Animal and GX200. Our connecting rod...

Fits ARC rods with stock stroke or stroker 1" (.9985") crankshaft journals. This is the standard bearing for "Stocker" 5 HP flathead rods. Also used in our 1" journal stroker rods for Jr. Dragsters...

Rod Bearing Briggs Vanguard

Our most popular "Lite" stock length billet connecting rod for the Briggs and Stratton Animal engine. It includes ARP bolts and bearing inserts. Now legal in WKA. 3.287" Animal "Lite" Stock Rod with...