Quick view DynoCams Premium Header Exhaust Gasket For Predator 212cc 196cc Fits Honda Clones Fiber Exhaust Gasket for the Predator engines. The bolt hole spacing is slightly further apart on the Predator than it is with the clone or GX160/200 engines. Gasket has "D" shaped port hole $1.50 Add to Cart
Quick view DynoCams MOD2 Cheater Cam predator 212 Hemi This cam has clearance for the crank counter weights on Hemi engines with the new style crank.The MOD2 is popular as a cheater stock cam if there are no duration checks.Requires an upgraded spring... $64.21 $59.47 Add to Cart
Quick view DynoCams DynoCams CL1 Predator Non-Hemi Our original CL1 grind. This cam offers a wide power band and works well in the restricted classes.Engine: Predator 212cc Non-HemiRecommended Class: RestrictedTarget (MAX) RPM: 5200-5800Spring... $44.95 Add to Cart
Quick view DynoCams 1.420 Valve Spring 18 lbs, Flathead The DCS1420 is a popular flathead spring, and is made from high quality wire. These springs are an excellent choice for Blue / Gold Restricted classes, and also works well with some of the less... $2.95 Add to Cart
Quick view DynoCams CS Grind, Non-Hemi Predator Aggressive ramp cam for Modified engines. A stock carb can be used with this cam, but it does require an upgraded spring package. Billet rod and flywheel are strongly recommended. The lobes are... $54.99 Add to Cart
Quick view DynoCams PVL Aluminum Flywheel - 196cc Clone GX200 Tillotson Predator 224 Ghost The PVL Flywheel for Clone is NOW available for use with STOCK COIL Engine: Clone 196cc, Fits Honda GX160/200, Tillotson, WildCat 223, Ducar 212, Predator 224, Predator GhostMaterial: Diecast... $87.95 Add to Cart
Quick view DynoCams Super X CM 265 HOT Grind, Predator 212cc Non-Hemi Cam Agressive ramp cam for a Modified motor. Use with bored stock or Tillotson carb. Requires upgraded spring package, billet rod and billet flywheel.Engine: 212cc OHV PredatorTarget (MAX) RPM:... $58.95 Add to Cart
Quick view DynoCams CS Grind, Clone Core Cam - Clone & Predator Hemi Agressive ramp cam for Modified class motor.Can use stock carb with this cam. Does require upgraded spring package.Billet rod and flywheel strongly recommended.Agressive ramp cam for Modified class... $54.75 Add to Cart
Quick view DynoCams 308 Grind, Tool Steel Billet Clone Core Cam The 308 is our most popular grind for modified clone class. This cam is easy on the valve train and has a very wide power band. This cam requires an upgraded spring package, billet rod, and billet... $189.99 Add to Cart
Quick view DynoCams MOD1 Grind, Welded Lobe Clone Core Cam The Clone MOD1 is an excellent choice for the clone modified class. This cam makes slightly more top end power than the 308 grind. This cam requires an upgraded spring package, billet rod, and billet... $112.99 Add to Cart
Quick view DynoCams Dynocams 356 Grind, Welded Lobe Clone Core Cam The DynoCams 356 is a high lift modified grind that is very capable of extreme RPMs. This cam has very aggressive ramps and requires an upgraded spring package, billet rod, and billet flywheel. For... $114.99 Add to Cart
Quick view DynoCams F-275 Grind Cam, Welded Lobe Clone GX200 Tillotson Predator 212 Hemi and 224 Max Welded Lobe Cam for Modified Classes. This cam has a .278 lift and has maximum open valve duration (Duration at 50 - 258.8 Degree, Duration at 200 - 158.1) Max RPMs 8200-8400 Spring Pressure... $113.99 Add to Cart
Quick view DynoCams DynoCams, 356 Grind, Welded Lobe GX390 Core The DynoCams 356 is a high lift modified grind that is very capable of extreme RPMs. This cam has very aggressive ramps and requires an upgraded spring package, billet rod, and billet flywheel. For... $139.99 Add to Cart
Quick view DynoCams DynoCams, 356 Grind, Tool Steel Billet GX390 Core The DynoCams 356 is a high lift modified grind that is very capable of extreme RPMs. This cam has very aggressive ramps and requires an upgraded spring package, billet rod, and billet flywheel. For... $209.99 Add to Cart
Quick view DynoCams 32LB Dual Valve Spring Set with Hardware, Clone 32LB Dual Valve Spring Set with HardwarePredator, Clone These are for use with 5.5mm valve stems $46.99 Add to Cart
Quick view DynoCams Clone/GX200 Stainless Steel Push Rod New Stainless Steel Pushrods for the Clone/GX200 Engines. Sold Separately. Stock Length. $4.22 Add to Cart
Quick view DynoCams MOD2 Grind, 196cc Clone GX200 Cheater Cam Mod 2 Cheater Stock Cam for Fits Honda GX200, BSP, or Blue Clone 6.5 HP engines. This cam meets the lift specs only of a stock cam. It has significantly more duration than the CL-1 cam giving more... $57.99 Add to Cart
Quick view DynoCams MOD2 Grind, Predator Non-Hemi Core Dyno Cams Mod 2 Cheater Stock Cam for the old style non "hemi" head Predator 212cc engines. It has significantly more duration than the CL-1 cam giving more overall power. The engine will still run smoothly at... $58.95 $54.95 Add to Cart
Quick view DynoCams Dyno Cams CM 265 HOT Grind Super X - Hemi 212cc GX200 196cc Dyno "CM" Modified Superbox Cam for Fits Honda GX200, Predator 212 HEMI, or BSP Clone 6.5 with bored stock carb or tilly carb.* This cam provides .265" lift at the cam, which works out to .275" lift... $58.95 Add to Cart
Quick view DynoCams BP2 Grind Clone Heat Treated Cam This cam meets lift requirements for stock but has a lot of extra duration producing better horsepower over a broader RPM range. Stock setup can be used, but works even better as a modified cam. This... $58.99 Add to Cart
Quick view DynoCams Dynocams CL-1 Improved Racing Cam For 196cc 6.5HP Engines The CL1 Improved has a more retarded centerline for optimal top end horsepower.Engine: 196cc OHV CloneRecommended Class: StockTarget (MAX) RPM: 6000-6500Spring Pressure (In / Ex): 10.8 lbsValve... $47.95 Add to Cart
