AZUSA

Sockethead Cap Screw, 1/4-28 X 7/8"

Sockethead Cap Screw, 1/4-28 X 1/2"

Sockethead Cap Screw, 1/4-20 X 1"

Screw, Fillister Head, 10-32 X 3/8"

72 Tooth 35 Chain 4-1/2" Sprocket Drum Riveted to Mini-Hub, 1" Bore. Machined outside for a band brake. Azusa Mini-Hub riveted to a 4-1/2" drum for use on a 1" live axle. Ideal for small, low...

Set Screw, 8-32 X 1/4"

Lockwasher, Split, 3/8" Id, Zinc Plated

Fender Washer, 1/4" Id X 1-1/2" Od, Zinc Plated

Fender Washer, 1/4" Id X 1" Od, Zinc Plated

Washer, 1/4" Id X 5/8" Od, Zinc Plated

Collar, Split, Steel, 50mm Id X 73mm Od X 15mm Wide, 8mm Keyway

Collar, Split, Steel, 1-3/8" Id X 2-1/4" Od X 1/2" Wide, 1/4" Keyway

Collar, Split, Steel, 1-1/4" Id X 2" Od X 1/2" Wide, 1/4" Keyway

Collar, Split, Steel, 3/4" Id X 1-3/4" Od X 1/2" Wide (No Keyway)

Collar, Split, Billet Aluminum, 50mm Id X 73mm Od X 15mm Wide, 8mm Keyway

Clip For Split Sprockets (#41 Thru #520 Chain With 1/4' Holes)

Sprocket Guard, Aluminum, .160" Thick, 10-1/4" OD This is for one side only!

Sprocket Guard, Aluminum, .160" Thick, 8-3/8" OD This is for one side only!

Sprocket Guard, Aluminum, .160" Thick, 6-7/8" OD This is for one side only!

Sprocket Guard, Aluminum, .125" Thick, 9-1/2" OD This is for one side only!

Sprocket Guard, Aluminum, .125" Thick, 8-7/8" OD This is for one side only!

Sprocket Guard, Aluminum, .125" Thick, 8-3/8" OD This is for one half only!

Sprocket Guard, Aluminum, .125" Thick,7-7/8" OD This is for one side only!

Made of case-hardened steel and hobbed teeth, "B" Type Sprockets have a hub on one side only. Unless otherwise noted, "B" type sprockets have two 5/16-18 set screws.