ARC Racing

All the parts your need to build your engine into a high performance engine. Turn your 6.5 horsepower Clone/Predator engine into a 14 to 15+ horsepower screamer. Target rpm range is 7500-7800 rpms...

OHV 70MM (2.756") Cylinder assembly. This is a Hemi replacement block that uses the Fits Honda /Clone cams, sidercover and top plate. Will require modification to upper and lower dowel pin holes to...

*Depending on availability, pushrods may be black anodized or uncoated. This is a pair of the "Do It Yourself" pushrod kit which features a 5.75" long shaft with 2 ball type ends. The rods are made...

New Stainless Steel Pushrods for the BSP/Clone/GX200/ non-Hemi Predator Engines. Stock Length. Price is for 2 pushrods

Kit contains two .1mm shims and two .2mm shims

Predator MLS head gasket .018" thick by 70mm(2.756") bore. MLS stands Multi Layer Steel. MLS head gaskets feature embossed stainless steel Viton coated outer layers for excellent sealing and...

ARC Precision Chain Break for #35 chain. Made in Albany Ga. The finest chain break on the market.

Sprocket / Rotor Hub  1-1/4"All hubs are CNC machined from billet aluminum alloy and have 6 bolts(1/4-20) on a 5-1/4" pattern.

ARC Billet Sprocket /Rotor Hub for a 1" axle This hub is CNC machined from billet aluminum alloy and have 6 (1/4-28) threaded holes on a 5-1/4" bolt pattern. Sprocket bolts are not included

ARC Lock Collar    Split 1-1/4"Made from billet aluminum alloy. CNC Machined.

Horizontal Rack and Pinion Assembly, drilled and tapped shaft (3/8-24 R/H) Designed to be used on JR Dragsters.Precision Machined billet aluminum housing with single piece steel rack and integrated...

Kart, Front HubHub Only, No bearings. Precision machined from 6061 T-6 aluminum, these hubs can be used for both Jr. Dragsters and Karts. Standard bolt patterns for 1/4-28 and 5/16-24 lug bolts,...

Billet aluminum rear wheel hub for 1" axle. Bolt pattern is 4 lug, tapped 1/2-20 on a 4" bolt circle. Use bolt/nut kit ARC_8150

Weld-on Caliper Mount  This Mount was designed to work with the 3050 sized caliper. It does not work with the 3055 Mini-Lite caliper.

High Quality and Performance in a Head Gasket for Briggs 5hp Flathead Raptor Engines

ARC's CNC Machined aluminum cable clevis for throttle cables. This is a quality, precise part that is used on all of our Top Plate Throttle kits and is useful for almost all applications when using...

Oil Drain plug with washer. Fits GX160 GX200 Clone BSP and Predator 212 engines.

Thick rubber air box to carb gasket for the GX390 and Predator 301/420cc engines

ARC Top Plate/Throttle Control Linkage Assembly for the Fits Honda GX270, GX340, GX390 and Predator 301cc and 420cc Engines. This Part is made with quality components and the same attention to detail...

The new 6695 billet flywheel from ARC Racing for the Predator 212 NON-Hemi has an ultra low drag fin design that will greatly reduce air drag on your racing engine, while still moving enough air for...

2 Pack of Heavy Duty Valve Springs for Honda GX240, GX270, GX340, & GX390.Approx 50 lbs at 1.125 installed height, 42lbs at 1.2, with 110 lb open pressure (.375 lift).

2 Pack of 22Lb Valve Springs.These springs are recommended for use with the stock retainers. 22lbs @ .850"

For Modified BSP, Clone, GX200, Predator 212, and Yamaha F200. 36lbs at .850 installed height and coil bind at .450. Requires part number ARC_DJ-1046 retainer and keeper kit. May require head...

2 Pack of 26Lb "White" Springs. Use as intake spring when using stock intake valve and ARC DJ-1046 Spring retainer. Use as Heavy spring for intake and exhaust when using our stainless (DJ-1121,22 and...

*Depending on availability, pushrods may be black anodized or uncoated. *SOLD INDIVIDUALLY* .187 Diameter chromoly stock length used in Fits Honda GX200, 196cc Clone, 1st and 3rd generation Harbor...

Predator MLS head gasket .018" thick by 72mm(2.835") bore. MLS stands Multi Layer Steel. MLS head gaskets feature embossed stainless steel Viton coated outer layers for excellent sealing and...

1.3 ratio GX200 / Clone Billet Steel Rocker SetReplaces the stock rockers with 1.3:1 ratio billet steel rocker arms, heavy duty billet steel rocker studs, lash caps, rocker pivots, adjuster nuts, set...