ARC Racing

 .010 Valve Spring Shim

 .005 Valve Spring Shim

6615 Drag PVL Flywheel. For use with the Fits Briggs and Stratton digital PVL ignition system on the Fits Honda GX200/196cc Clone, Tillotson 196/212/225/228/236 engines. Finnless Flywheel designed...

Honda Gx160 UT2 piston. Use with DJ-2190 rings.

Oil Drain plug with washer. Fits GX160 GX200 Clone BSP and Predator 212 engines.

Thick rubber air box to carb gasket for the GX390 and Predator 301/420cc engines

(2) Chromoly Cut to Length Push Rod for Honda GX390 *SOLD AS A PAIR* When shortening the columns more than 3/8" it will be necessary to re-size the hole with a .125" reamer to a min. depth of .250"...

*Depending on availability, pushrods may be black anodized or uncoated. Chromoly Cut to Length Push Rod for Honda GX390 *SOLD INDIVIDUALLY* When shortening the columns more than 3/8" it will be...

PVL ignition coil 555681 has a 12,000 RPM limit! For use on Animal, World Formula, and with the ARC PVL billet flywheels. You must use the specific PVL flywheel with this coil  

ARC Top Plate/Throttle Control Linkage Assembly for the Fits Honda GX270, GX340, GX390 and Predator 301cc and 420cc Engines. This Part is made with quality components and the same attention to detail...

The new 6695 billet flywheel from ARC Racing for the Predator 212 NON-Hemi has an ultra low drag fin design that will greatly reduce air drag on your racing engine, while still moving enough air for...

The new 6689 billet flywheel from ARC Racing has an ultra low drag fin design that will greatly reduce air drag on your AKRA racing engine, while still moving enough air for cooling. Less air drag on...

2 Pack of Stock Appearing Valve Springs for the Briggs Animal

2 Pack of Heavy Duty Valve Springs for Honda GX240, GX270, GX340, & GX390.Approx 50 lbs at 1.125 installed height, 42lbs at 1.2, with 110 lb open pressure (.375 lift).

2 Pack of 22Lb Valve Springs.These springs are recommended for use with the stock retainers. 22lbs @ .850"

For Modified BSP, Clone, GX200, Predator 212, and Yamaha F200. 36lbs at .850 installed height and coil bind at .450. Requires part number ARC_DJ-1046 retainer and keeper kit. May require head...

2 Pack of 26Lb "White" Springs. Use as intake spring when using stock intake valve and ARC DJ-1046 Spring retainer. Use as Heavy spring for intake and exhaust when using our stainless (DJ-1121,22 and...

Predator MLS head gasket .018" thick by 72mm(2.835") bore. MLS stands Multi Layer Steel. MLS head gaskets feature embossed stainless steel Viton coated outer layers for excellent sealing and...

1.3 ratio GX200 / Clone Billet Steel Rocker SetReplaces the stock rockers with 1.3:1 ratio billet steel rocker arms, heavy duty billet steel rocker studs, lash caps, rocker pivots, adjuster nuts, set...

New and Improved 1.3 Ratio Roller Tip Rockers for the Clone and Fits Honda GX160/200/Predatro 212 NON-Hemi Engines Precision machined from chromoly steel with hardened roller tips and shafts. Dyno...

***MUST USE WITH DJ-1070CM PUSH RODS. Rocker Arms, Roller tip for the Habor Freight Hemi Predator 212 from NR Racing. Machined from chrome moly steel in 1.2/1 ratio. Hardened roller tips and...

New and Improved 1.2 Ratio Roller Tip Rockers for the Clone and Fits Honda GX160/200/Predator 212 NON-Hemi Precision machined from chromoly steel with hardened roller tips and shafts. Dyno tested to...

The CL3 utilizes the -5 duration check, in the AKRA rule package, by allowing a softer ramp rate on the nose of the cam. This design has shown gains in the 6200+ RPM range with minimal loss in peak...

The Gage Black Venom Roller Rocker Arms are a high-quality component designed to enhance the performance of your engine. Fits Honda GX160/GX200, Predator 212/224 Non-Hemi, 196cc Clones, and Tillotson...

14x1.5mm Extended Starter Nut for Honda /196 Clone / Predator 212 and Yamaha, 66.5mm long

SFI certified billet aluminum flywheel for Kohler CH270 or the hemi head Harbor Freight Predator 212cc engine (cast aluminum valve cover). Harbor Freight model #60363. The keyway is fixed and the...