ARC Racing

Chain Break Replacement Bolt W/Pin

 Heavy Duty Sprocket / Rotor Hub  for 1-1/4" axlesAll hubs are CNC machined from billet aluminum alloy and have 6 bolts(1/4-20) on a 5-1/4" pattern.

Sprocket / Rotor Hub  1-1/4"All hubs are CNC machined from billet aluminum alloy and have 6 bolts(1/4-20) on a 5-1/4" pattern.

ARC Billet Sprocket /Rotor Hub for a 1" axle This hub is CNC machined from billet aluminum alloy and have 6 (1/4-28) threaded holes on a 5-1/4" bolt pattern. Sprocket bolts are not included

ARC Lock Collar    Split 1-1/4"Made from billet aluminum alloy. CNC Machined.

Vertical Rack and Pinion Assembly Designed for JR DragstersPrecision Machined billet aluminum housing with single piece steel rack and integrated rack gear with 5/8" diameter shaft.Overall...

Horizontal Rack and Pinion Assembly, drilled and tapped shaft (3/8-24 R/H) Designed to be used on JR Dragsters.Precision Machined billet aluminum housing with single piece steel rack and integrated...

Kart, Front HubHub Only, No bearings. Precision machined from 6061 T-6 aluminum, these hubs can be used for both Jr. Dragsters and Karts. Standard bolt patterns for 1/4-28 and 5/16-24 lug bolts,...

ARC 9023 Rear Hub, for 3/4" axlesPrecision machined from 6061 T-6 aluminum, these hubs are designed for increased strength. This hub has dual patterns for 1/4-28 and 5/16-24 lug bolts on a 3 x 2.5"...

 ARC Rear Hub for 1-1/4" axlesPrecision machined from 6061 t-6 aluminum, this hub is designed for increased strength. All models have dual patterns for 1/4-28 and 5/16-24 lug bolts on a 3 x 2.5"...

Rear Wheel Hub ARC_9030Billet Hub with 4/4 pattern (4 holes on a 4" circle) for 1 1/4" axlePrecision machined from 6061 T-6 aluminum Use part # 741253 for the studs and nuts

Billet aluminum rear wheel hub for 1" axle. Bolt pattern is 4 lug, tapped 1/2-20 on a 4" bolt circle. Use bolt/nut kit ARC_8150

Weld-on Caliper Mount  This Mount was designed to work with the 3050 sized caliper. It does not work with the 3055 Mini-Lite caliper.

TECH KIT FEATURES:  Contains - Main Jet .042 No-Go Gauge; -Pilot Jet .019 No-Go Gauge; -Emulsion Tube .066 No-Go GaugeBox Stock Project : Carburetor - Choke Bore .810 No-Go Gauge   -...

This Bracket designed to check Cam lift in Clone engines. It uses a Dial Indicator (not included)  

MUST SHIP UPS GROUND - F.T.S.     TT SERIES     INSIDE SOLUTIONSTT Stands for Tacky Track  *  This formula is used for the situations where the...

High Quality and Performance in a Head Gasket for Briggs 5hp Flathead Raptor Engines

.032" Copper Head Gasket for Briggs  Blockzilla 2

.032" Copper Head Gasket for the Briggs Blockzilla 3

ARCs Rear Wheel Hub Assembly features 2 choices of bolt sizes that may be used with it. One combination of 4 bolt holes is threaded for 110mm bolts and the other takes 115mm. CNC Machined from 6061...

ARC's CNC Machined aluminum cable clevis for throttle cables. This is a quality, precise part that is used on all of our Top Plate Throttle kits and is useful for almost all applications when using...

Our Full length, special bronze alloy split valve guides, for the Briggs Model 13, 5hp flathead, are a must when your looking for superior oil retention and maximum resistance to wear. .310" O.D.(for...

ARC Rear Wheel Hub Assembly features 2 choices of bolt sizes that may be used with it. One combination of 4 bolt holes is threaded for 110mm bolts and the other takes 115mm. CNC Machined from...

3/8-24 Right hand thread male tie rod end.

3/8-24 Left hand thread male tie rod end.

5/16-24 Right hand thread male tie rod end.

5/16-24 Left hand thread male tie rod end.

8 foot Throttle Cable Jacket

16ft 3/16" Hydraulic Brake Line

For Jr Dragsters and Lawnmower Racers (4) 1/2-20 x1-1/2" Long Bolts (4) Flanged Nuts