ARC Racing

The new "660" Drag series billet flywheel for the Honda GX200, Clone 196, Ducar 196/212, Tillotson 196/212, Predator Ghost 212 and Predator 224cc engines from ARC Racing. Features a finless drag...

GX390 small hole blower cover

6615 Drag PVL Finless Flywheel designed for the Junior Dragster Engines. It has an adjustable hub that allows timing changes at 1 degree increments in as little as 90 seconds without the use of...

All sizes of main jets for Predator Engines, Honda Clone Engines, Box Stock Engines and other Chinese Clones. These can be used as replacements for stock or upgrades in performance applications...

Predator 212cc Head Gasket .009" thick

Predator 212cc Hemi 25mm Exhaust Valve (Hemi OEM replacement). This 25mm exhaust valve has a 5.5mm stem and works with stock type retainers

OHV 212cc Bare Cylinder Head. This is a replacement head for the Hemi 212 or the Fits Honda /Clone engines. Can be used on Predator 212 Non-Hemi blocks if the dowel on holes are drilled to 11MM's...

*Depending on availability, pushrods may be black anodized or uncoated. Set of (2) .187" Diameter, 5.260" long, chromoly stock length pushrods used in GX200, 196cc Clone, BSP, and 1st and 3rd...

*Depending on availability, pushrods may be black anodized or uncoated. This is a pair of the "Do It Yourself" pushrod kit which features a 5.75" long shaft with 2 ball type ends. The rods are made...

New Stainless Steel Pushrods for the BSP/Clone/GX200/ non-Hemi Predator Engines. Stock Length. Price is for 2 pushrods

Exhaust Spring Ultralite Retainer. NOT RECOMMENDED FOR SPRINGS OVER 10.8 POUNDS

Intake Spring Ultralite Retainer. NOT RECOMMENDED FOR SPRINGS OVER 10.8 POUNDS

Low lift square tip rocker arm for the BSP/Clone engines

HONDA   GX200 UT1 thin ring-short skirt FLAT TOP piston standard bore. This line of pistons by Honda, the UTI pistons are lighter, with shorter skirt lengths and the rings...

Kit contains two .1mm shims and two .2mm shims

Fits Honda GX390 Oil Seal

GX390 Insulator to Head Gasket

Kit contains two .1 mm shims and two .2 mm shims

Rubber Valve Cover Gasket For The BSP Clone 196cc Engines. Seal better and last longer than the traditional cork gaskets. "May" work on the newest Gen3 Predator 212cc engines with 27/25 valves and...

MLS stands Multi Layer Steel. MLS head gaskets feature embossed stainless steel Viton coated outer layers for excellent sealing and corrosion resistance properties. 

MLS stands Multi Layer Steel. MLS head gaskets feature embossed stainless steel Viton coated outer layers for excellent sealing and corrosion resistance properties.  

Crank Bearing for our 6057 and 6058 Sidecovers

Dyno testing has shown as much as 4 tenths/HP and an average of 2 tenths/HP gain using Low Tension Ring Sets over stock OEM rings. The low tension rings are heat treated in a special...

Predator MLS head gasket .036" thick by 70mm(2.756") bore. MLS stands Multi Layer Steel. MLS head gaskets feature embossed stainless steel Viton coated outer layers for excellent sealing and...

Predator MLS head gasket .027" thick by 70mm(2.756") bore. MLS stands Multi Layer Steel. MLS head gaskets feature embossed stainless steel Viton coated outer layers for excellent sealing and...

Predator MLS head gasket .018" thick by 70mm(2.756") bore. MLS stands Multi Layer Steel. MLS head gaskets feature embossed stainless steel Viton coated outer layers for excellent sealing and...

This is the .002" undersized standard bearing used on the flathead Briggs. Used on a slightly worn crank. This bearing is also used on many stroker rods for other engines such as the Animal and GX200...

ARC Precision Chain Break for #35 chain. Made in Albany Ga. The finest chain break on the market.