If you are looking for mini bike TAV parts, check out the wide range at OMB Warehouse. The parts are sourced from the manufacturers and are OEM replacement parts. These mini bike TAV parts are designed to be used on mini-bikes and wake wrenches with engine sizes 3HP to 7HP. This is a must on live axle go-karts especially those with rear tires larger than 16" tall. A centrifugal clutch will not pull or hold up to these demands. For your convenience, this kit comes with both sprockets, a #35 chain 12 tooth sprocket and the #41/40/420 chain with the #10 tooth sprocket. These mini bike TAV parts are asymmetrical type torque converter systems which means the sheaves faces are non-symmetrical. The asymmetric concept, having the 18° angle on one side requires less sheave face travel to lift the belt to larger, comparable pitch diameters of the symmetrical system. This makes it possible to force the belt to a diameter within the drive clutch (at high RPM) that exceeds the usual 1:1 ratio of standard systems. The TAV can attain a .90:1 or 10% overdrive. Among the mini bike TAV parts here are the 30 series driver 3/4" bore part, 30 series driven, 5/8" bore part, 12T #35 sprocket parts.
TAV Parts
If you are looking for mini bike TAV parts, check out the wide range at OMB Warehouse. The parts are sourced from the manufacturers and are OEM replacement parts. These mini bike TAV parts are designed to be used on mini-bikes and wake wrenches with engine sizes 3HP to 7HP. This is a must on live axle go-karts especially those with rear tires larger than 16" tall. A centrifugal clutch will not pull or hold up to these demands. For your convenience, this kit comes with both sprockets, a #35 chain 12 tooth sprocket and the #41/40/420 chain with the #10 tooth sprocket. These mini bike TAV parts are asymmetrical type torque converter systems which means the sheaves faces are non-symmetrical. The asymmetric concept, having the 18° angle on one side requires less sheave face travel to lift the belt to larger, comparable pitch diameters of the symmetrical system. This makes it possible to force the belt to a diameter within the drive clutch (at high RPM) that exceeds the usual 1:1 ratio of standard systems. The TAV can attain a .90:1 or 10% overdrive. Among the mini bike TAV parts here are the 30 series driver 3/4" bore part, 30 series driven, 5/8" bore part, 12T #35 sprocket parts.