Crank Adapter Sleeve
This will allow the use of a 1" torque converter or clutch on the Coleman minibikes and other engines with 16MM crankshaft
- Adapter sleeve, 16MM to 1" OD
- 3/16" x 1/4" x 1-1/4" Keystock
- 16MM ID washer
- Extended tip set screw
- M6-1.0 x 55MM Crank Bolt
- M6 Flat Washer
Place the 16MM ID washer onto the crank and slide the sleeve on the crank. Place the 3/16"x1/4" key in the slot in line with the set screw. Insert the set screw and tighten it down so it is snug. Now you can install the torque converter or clutch with the provided 1/4" key slot in the sleeve.
We have included an M-1.0 x 55MM bolt and washer to use on the Coleman products. Please verify the bolt threads all the way in!
Due to the inconsistencies in the Coleman products, please verify the bolt size BEFORE using an impact gun or wrench!