Stens

Stens Brand For LVU21853Belt ApplicationDeckBelt TypeDouble VWidth5/8"Length117 1/4"Packaging typeBranded sleeve

Stens Brand For M48444Belt ApplicationDeckBelt TypeCoveredWidth5/8"Length144 3/8"Packaging typeBranded sleeve

Rear Entry Gun with Extension / Pack Size:1Gallons Per Minute: 7, with extension, Inlet: 22 mm MALE, Pounds Per Square Inch: 3200, Temperature: 140 � F MAXIMUM, Outlet: 22 mm...

Fits Kohler 24 393 16-SEthanolNot compatible with greater than 10% ethanol fuelFits 1/4" fuel lineVacuum type

Line Strainer / W/Garden Hose AdapterPack Size:1MTA 200033535, Tilton AR840, NHC 285-1051 Garden hose adapter with tension spring, Inlet: 1/2 " FEMALE, Outlet: 1/2 " MALECompetitor:MTA 200033535,...

OEM Fuel Filter Shop Pack / Fits Walbro 125-528PPack Size:1Fits Walbro 125-528PNHC 203-7684 Package of 50, Non-replaceable felt, Priced per pack, sold per pack, Order as 1 to receive 50, Fits fuel...

Fits Ariens 02483859Width3 5/8"Length5 3/4"Height1 1/4"Center to Center3"Two 7/16" W x 1 3/4" L slotsNon-abrasiveDurable polyethylene material designed to resist...

Trigger Gun / Pack Size:1 Includes 36" lance and 1/4" quick coupler, Pounds Per Square Inch: 5000, Entry: Rear, Inlet: 3/8 " FEMALE, Temperature: 210 � F MAXIMUM, Gallons Per Minute: 7, Outlet: 1/4 "...

Lance/Wand-Dual 40" Extension / 1/4"M In;1x1/4"F & 1x1/8"F-OutPack Size:1Inlet: 1/4 " MALE, For dispensing soap/chemical or high pressure water with the turn of the side handle, Pounds Per Square...

Cylinder Assembly / Replaces 1128 020 1250Pack Size:1Replaces Replaces 1128 020 1250Replaces Replaces MS 461 chainsaws and GS 461 Rock Boss concrete sawIncludes: Piston, rings, pin and clips,...

Belt / 5/8" x 76"Pack Size:1Fits Goodyear 85760, Fits Jacobsen 336485, Fits Yazoo 205-073, Fits Gates 6976, Fits Dayco L576, Fits Yazoo 205-074, Fits AYP 6118R, Fits Toro 68-3030, Fits Craftsman...

Rear Entry Gun / Pack Size:1Gallons Per Minute: 10, Entry: Rear, Inlet: 3/8 " FEMALE, Outlet: 1/4 " FEMALE, Pounds Per Square Inch: 5000Specification:Gallons Per Minute: 10, Entry: Rear, Inlet: 3/8 "...

Rear Entry Gun W/14" Extension / 3/8"F Inlet x 22mm CouplerPack Size:1Oregon 37-311, Oregon 37-057Pounds Per Square Inch: 3,625, Made By: An OEM supplier, Outlet: 22 mm FEMALE, Gallons Per Minute: 6...

Belt / 5/8" x 106"Pack Size:1Fits Dixie Chopper 30203, Fits Simplicity 1657517SM, Fits Toro 113625, Fits Scag 48086, Fits Simplicity 1657517, Fits Ref No B103, Fits Dixie Chopper 2006B103R, Fits...

Fuel Filter Shop Pack / Replaces 0000 350 3504Pack Size:1Replaces Replaces 0000 350 3504, Replaces 0000 350 3515Prime Line 7-023009Replaces Replaces 020, 024, 026, 034, 036, 038, 044, 046, 064, 066,...

3/8" InletLength50'Temperature140 FMax Temperature140 FMade ByAn OEM Supplier3/8" x 50' replacement/extension hoseHigh pressure hose for cold water pressure washersDual-braid construction of...

Pressure Washer Hose / 3/8" InletPack Size:1Oregon 37-064 3/8" x 25' replacement/extension hose, No tools required, Equipped with quick connect fittings for quick and easy setup - 3/8" Male QC Plug x...

Pressure Washer Hose / 5/16" InletPack Size:1 Includes a 14/15mm M22 hose connector, Polyurethane outer jacket is non-marring and abrasion resistant, 140�F Max, Designed to fit most gas pressure...

5/16" InletLength50'Temperature140 FMax Temperature140 FPolyester-braided high pressure hose for cold water pressure washersMorFlexTM technology for high flexibility and kink resistanceIncludes a...

Fuel Filter Shop Pack / Replaces 0000 350 3503Pack Size:1Replaces Replaces 1115 350 3503, Replaces 0000 350 3500, Replaces 0000 350 3503, Replaces 1120 350 3500, Replaces 0000 350 3502Sunbelt FF-203,...

Belt / 5/8" x 77"Pack Size:1Fits 342660, Fits Goodyear 85770, Fits Jacobsen 342660, Fits Gates 6977, Fits Dayco L577, Fits Toro 110037, Fits Toro 116666, Fits Murray 16297, Fits AYP 11361, Fits Toro...

Stens Brand For M150717Belt ApplicationTimingBelt TypeSynchronousWidth5/8"Length78 3/4"Packaging typeBranded sleeve

Stens Brand For LVA18613Includes PulleyTRUEVolt12RegulatorInternalWarrantyWill be voided upon striking or disassemblingPackaging typeBranded box

Stens Brand For GX20053OD1 3/8"Height1"HRC 30Packaging typeBranded bag

Stens Brand For TY6776Includes PulleyTRUEVolt12Verify OEM part number by referring to engine model and spec - does not all applicationsWarrantyWill be voided upon striking or disassembling

Fits Bobcat 7018593Volt12WarrantyWill be voided upon striking or disassemblingNumber of Teeth9

Stens Brand For SE501867Volt12WarrantyWill be voided upon striking or disassemblingNumber of Teeth11

Fits Bobcat 6636421Volt12WarrantyWill be voided upon striking or disassemblingNumber of Teeth11

Stens Brand For SE501855Volt12WarrantyWill be voided upon striking or disassemblingNumber of Teeth10

Stens Brand For TY6647Includes PulleyTRUEVolt12Verify OEM part number by referring to engine model and spec - does not all applicationsWarrantyWill be voided upon striking or disassembling