Stens

X-LargeBlack foam nitrile palm coating provides improved grip in wet or light oil applicationsGray shell helps to conceal dirt and promote longer wearSeamless 13 gauge nylon knit linerSizeX-Large

Chain Number420Chainsaw Pitch1/2"Width5/16"

40° spray angleStainless SteelColorWhiteNozzle Size3Spray Angle40�Tip Size1/4"

25 Degree, Size 5.5, GreenStainless SteelColorGreenNozzle Size5.500Spray Angle25�Tip Size1/4"

0 Degree, Size 5.0, RedStainless SteelColorRedNozzle Size5Spray Angle0�Tip Size1/4"

1/4" Male InletGallons Per Minute10.500Inlet1/4"Inlet Thread TypeMALEMaterialBrassMax PSI4000Max Temperature300�FTemperature300�F

1/4" Female InletGallons Per Minute10.500Inlet1/4"Inlet Thread TypeFEMALEMaterialBrassMax PSI4000Max Temperature300�FTemperature300�F

3/8" MaleGallons Per Minute10.500MaterialSteelMax PSI4000Max Temperature300�FSize3/8Temperature300�F

1/4" Male InletGallons Per Minute10.500MaterialSteelMax PSI4000Max Temperature300�FSize1/4Temperature300�F

1/4" Pl Steel, Female, 5000 PSIMade ByAn OEM SupplierMaterialPlated steelMax PSI5000Size1/4

1/4" Pl Steel, Male, 5000 PSIMade ByAn OEM SupplierMaterialPlated steelMax PSI5000Size1/4

Female 22mm x Male 1/4"Gallons Per Minute7.800Inlet1/4"Inlet Thread TypeMALEMade ByAn OEM SupplierMax PSI4000Outlet22 mmOutlet Thread TypeFEMALE

22mm Male InletVarispray NozzleGallons Per Minute8Inlet22 mmInlet Thread TypeMaleLength16"Max PSI4000Temperature300�F

22mm Male InletChromed steelOutlet" 1/4" quick connectGallons Per Minute10Inlet22 mmInlet Thread TypeMALELength16"Max PSI5000Max Temperature300�FTemperature300�F

W/7" Grip; Zinc Plated10 1/2" gripInlet1/4"Inlet Thread TypeMALELength36"Made ByAn OEM SupplierMaterialZinc Plated SteelMax PSI3600Outlet1/4"Outlet Thread TypeMALE

All Balls 3500LB WINCH SYN

Toro 7-0431Color may varyFor explanation of letters, refer to the drawing by clicking on More InfoA:4"C:3/8"D:3/4"E:1/2"F:11/32"H:3/16"Height3/4"ID3/8"Made...

Snapper 7014340YPColor may varyFor explanation of letters, refer to the drawing by clicking on More InfoA:2...

MTD 756-0638Height3"ID1 1/2"Made ByAn OEM SupplierOD5"

Warner 5219-99Adjustment and maintenance freeDesigned for Rugged UseFor proper ordering, reference Warner or Ogura part numbers stamped on clutchTo prevent premature clutch failure, follow the...

MTD 983-0055-06373/16" THKSteelLength3 7/8"Width1 5/8"

MTD 714-0143ALength1 3/4"OD1/4"

Bobcat 64173-05Length1 1/4"OD3/16"

Honda 23511-VB3-801Honda code 2756716ID1.409"OD1.978"

Snapper 7600135YPLining by itself not available from SnapperPre-formed for easy installationPresses into back of drive discWill perform equally well with either side in discHeight1/8"Length16...

MTD 946-04237Cable EndsSpring on one end, and Z bend on one endCable Length41 3/4"Conduit Length25 3/4"Made ByAn OEM Supplier

MTD 946-08974 1/2" Z bend rod lengthCable EndsZ bend one end, spring on otherCable Length45"Made ByAn OEM Supplier

Toro 106-8300Cable EndsZ bend one end, spring on otherCable Length47"Conduit Length33"

JD8239Height0.715"ID0.870"OD1.965"Ref NoM12610/M12648

Snapper 7046983YPHeight0.438"ID0.560"OD1.375"