OMB Warehouse

Pair of Tote Gote Foot Peg Covers

Rupp Fork Boots - Rubber. Upper ID is 1-1/4" Lower ID is 15/16" Sold in pairs. Will fit other mini bikes.

Reproduction Rupp Grips - Pair. Includes (1) 1" Grip for throttle and (1) 7/8" Grip for left side. 4-1/2" Length

(2) Plates & (2) Weld on brackets included. Heavy duty adjustable jackshaft plates. Welding required.(2) Plates & (2) Weld on brackets included. Heavy duty adjustable jackshaft plates...

RW202 - Youth wedge helmet support - Blue. Black pictured.

Black

35 Chain - 68 Tooth Sprocket for Cat Mini Bikes with Disc Brakes Made from 10GA Steel If your CAT Bike has a disc brake, you need this sprocket! Sprockets Measurements: Diameter - 8-5/16" Center...

5/8" Bore Sprocket for #35 Chain 17 Tooth without Keystock5/8" Bore B Type Engine Sprocket for Jackshafts. B Type sprockets have a hub on one side. Keyways are 3/16". B sprockets have (2) 5/16-18 set...

5/8" Bore Sprocket for #35 Chain 18 Tooth without Keystock5/8" Bore B Type Engine Sprocket for Jackshafts. B Type sprockets have a hub on one side. Keyways are 3/16". B sprockets have (2) 5/16-18 set...

5/8" Bore Sprocket for #35 Chain 16 Tooth without Keystock5/8" Bore B Type Engine Sprocket for Jackshafts. B Type sprockets have a hub on one side. Keyways are 3/16". B sprockets have (2) 5/16-18 set...

5/8" Bore Sprocket for #35 Chain 15 Tooth without Keystock5/8" Bore B Type Engine Sprocket for Jackshafts. B Type sprockets have a hub on one side. Keyways are 3/16". B sprockets have (2) 5/16-18 set...

5/8" Bore Sprocket for #35 Chain 14 Tooth without Keystock5/8" Bore B Type Engine Sprocket for Jackshafts. B Type sprockets have a hub on one side. Keyways are 3/16". B sprockets have (2) 5/16-18 set...

5/8" Bore Sprocket for #35 Chain 12 Tooth without Keystock5/8" Bore B Type Engine Sprocket for Jackshafts. B Type sprockets have a hub on one side. Keyways are 3/16". B sprockets have (2) 5/16-18 set...

Bronze Bushing 1/2" ID Shaft Diameter 5/8" OD 3/4" Length 7/8" OD Flange  1/8" Thick Flange

5/8" Zinc Plated Washer

Bronze Bushing 5/8" ID (Shaft) 3/4" OD 1/8" Flange Thickness 5/8" Length 1" Flange OD

Bronze Bushing 5/8" ID (Shaft) 3/4" OD 1/8" Flange Thickness 3/4" Length 1" Flange OD

Throttle linkage kit for Briggs animal engine. Kwik-Link comes with a picture for easier installation.

Grade 5 Zinc-Plated Steel Hex Head Cap. 5/8"-18 Thread 9" Long

3/4" Bore Sprocket for #35 Chain 14 Tooth with 3/16" Keyway3/4" Bore B Type Engine Sprocket for Jackshafts. B Type sprockets have a hub on one side. Keyways are 3/16". B sprockets have (2) 5/16-18...

3/4" Bore Sprocket for #35 Chain 12 Tooth with 3/16" keyway3/4" Bore B Type Engine Sprocket for Jackshafts. B Type sprockets have a hub on one side. Keyways are 3/16". B sprockets have (2) 5/16-18...

Fits models V, VA, LV, H, LAV, HS, TNT, TVS series. 3.5, 4 & 5 hp vertical. 3, 3.5, 4, 5 & 7 hp horz.Fits models V, VA, LV, H, LAV, HS, TNT, TVS series. 3.5, 4 & 5 hp vertical. 3, 3.5, 4,...

(4) Mini Bike & Go Kart Wheel Bearings 5/8" ID x 1-3/8" OD x 7/16" Thick Precision Sealed Ball Bearing With double seals, the precision ground and hardened components of precision sealed bearings...

3/4" Bore Sprocket for #35 Chain 16 Tooth 3/16" Keyway3/4" Bore B Type Engine Sprocket for Jackshafts. B Type sprockets have a hub on one side. Keyways are 3/16". B sprockets have (2) 5/16-18 set...

3/4" Bore Sprocket for #35 Chain 15 Tooth 3/16" Keyway3/4" Bore B Type Engine Sprocket for Jackshafts. B Type sprockets have a hub on one side. Keyways are 3/16". B sprockets have (2) 5/16-18 set...

3/4" Bore Sprocket for #35 Chain 13 Tooth with 3/16" Keyway3/4" Bore B Type Engine Sprocket for Jackshafts. B Type sprockets have a hub on one side. Keyways are 3/16". B sprockets have (2) 5/16-18...

5/8" Bore Sprocket for #35 Chain 20 Tooth without Keystock5/8" Bore B Type Engine Sprocket for Jackshafts. B Type sprockets have a hub on one side. Keyways are 3/16". B sprockets have (2) 5/16-18 set...