OMB Warehouse

10" Inside Diameter Sleeves7" Wide HDPE sleeves, sold in pairs. The HDPE sleeves have greater durability and longer life compared to PVC sleeves. PLEASE NOTE THESE WILL NOT FIT THE COLEMAN DT200...

Centrifugal clutch for 3/4" shaft engine with upgraded mounting hardware. Shaft size: 3/4" Bore Chain Size: #35 Chain Tooth Count: 12 Tooth Engagement is Approximately: 1800-2200 RPMs Replace your...

This is a clone version of the popular (but expensive) GX160 Hi-Compression 14cc head with valve guides installed and valve seats installed and cut. Great for a stock appearing clone class because it...

3' 1/4" Yellow Fuel Line Hose Clamp Filter Mini Bike Go Kart Tractor Generator Kit Includes the following: (1) - 3 Feet of Yellow 1/4" Fuel Line (1) - 1/4" Clear Fuel Filter (4) - Green Hose Clamps

3' Length Of 1/4" ID X 3/8" OD Blue Fuel Line This premium vinyl fuel line will work for your various outdoor power equipment. Special formula, vinyl gas and oil tubing for mini bikes, go karts,...

Rubber Seat Mounting Grommets 10 Pack Sprint Racing Go Kart Trike Anti Vibration

Fits Briggs & Stratton, Tecumseh, Fits Honda , Fits Honda Clone, & Predator 212cc. This is the small pattern for 2HP to 6.5HP engines (1) 5" x 12" Heavy Engine Mount Plate (8) Large Flat...

Fits Briggs & Stratton, Tecumseh, Fits Honda , Fits Honda Clone, & Predator 212cc. Fits most engines from 2HP to 6.5HP. (1) 7-3/4" x 8-3/4" Engine Mount Plate (8) Large Flat Washers (8)...

Fits Briggs & Stratton, Tecumseh, Fits Honda , Fits Honda Clone, & Predator 212cc. Fits most engines from 2HP to 6.5HP (1) 5" x 12" Engine Mount Plate (8) Large Flat Washers (8) Rubber...

Add More Power! So you bought the Stage 1 kit, and now you want more power? AMP it up with this kit! This kit allows you to remove the governor safely and get the power you want! This simple "bolt...

Add More Power! So you bought the Stage 1 kit and now you want more power? AMP it up with this kit! This kit allows you to remove the governor safely and get the power you want! This simple bolt "in"...

(1) 3/4" Bore, #40/41/420 Chain, 10 Tooth Clutch (1) 5' Length of #40/41/420Chain (1) #40/41/420 Master Link. Does not come with set screws. Fits most engines.

(4) 5/8" ID x 1-3/8" OD x 7/16" Thick Precision Sealed Ball Bearing with Snap Ring Two seals with precision ground and hardened components for wheel and jackshaft use.

Throttle Assembly for Mini Bikes, or other equipment with 7/8" Handle Bars and Predator 212cc Engines. Fits Hemi and Non-Hemi Engines. Includes 7/8" Throttle Assembly Throttle Cable (48" conduit,...

This kit fits Honda engines including GX160/GX200/196cc Clone/Predator 212cc Go Kart Performance Stage 1 This is a basic performance kit to put on your motor for a go kart. Make sure you use a billet...

1" Black ribbed grips or foot peg covers. Approximate complete length: 4-1/2".

Black anodized, 1-1/4" extended bore wheel hub comes complete with 1/4" hardware and is drilled and tapped for both 1/4" & 5/16" bolts.

Black anodized, 1-1/4" bore, American pattern wheel hubs come complete with 1/4" hardware and are drilled and tapped for both 1/4" & 5/16" bolts. Wheel hubs come complete with 1/4”...

1-1/4" bore American pattern wheel hubs come complete with 1/4" hardware and are drilled and tapped for both 1/4" & 5/16" bolts. Wheel hubs come complete with 1/4” hardware and are...

#35 Chain, 60" (159 Pitches) 5 feet, Boxed With Connecting Link

Make sure you use a billet flywheel if you have taken the governor off of your motor! Kit includes: (1) Billet Rod, standard length (1) Mod2 Cam (1) Hi Comp 14cc cylinder head (1) head gasket (1)...

Make sure you use a billet flywheel if you have taken the governor off of your motor!Kit includes:(1) Billet Rod, standard length(1) Mod2 Cam(1) angled air filter(1) air filter adapter(1) choke hold...

Make sure you use a billet flywheel if you have taken the governor off of your motor!Kit includes:K&N Style Angled Air FilterBillet Air Filer AdapterChoke Hold BracketHeavy Rubber gasketNon-EPA...

Make sure you use a billet flywheel if you have taken the governor off of your motor! Kit includes: (1) angled air filter (1) air filter adapter (1) choke hold bracket (1) heavy rubber gasket (1)...

Make sure you use a billet flywheel if you have taken the governor off of your motor!Kit includes:(1) Billet Rod, standard length(1) Mod2 Cam(1) Upgraded air filter adapter(1) angled air filter(1)...

Make sure you use a billet flywheel if you have taken the governor off of your motor!Kit includes:(1) Billet Rod, standard length(1) Mod2 Cam(1) Upgraded air filter adapter(1) angled air filter(1)...