ARC Racing

(2) Chromoly Cut to Length Push Rod for Honda GX390 *SOLD AS A PAIR* When shortening the columns more than 3/8" it will be necessary to re-size the hole with a .125" reamer to a min. depth of .250"...

*Depending on availability, pushrods may be black anodized or uncoated. Set of (2) .187" Diameter, 5.260" long, chromoly stock length pushrods used in GX200, 196cc Clone, BSP, and 1st and 3rd...

2 Pack of 22Lb Valve Springs.These springs are recommended for use with the stock retainers. 22lbs @ .850"

2 Pack of 26Lb "White" Springs. Use as intake spring when using stock intake valve and ARC DJ-1046 Spring retainer. Use as Heavy spring for intake and exhaust when using our stainless (DJ-1121,22 and...

For Modified BSP, Clone, GX200, Predator 212, and Yamaha F200. 36lbs at .850 installed height and coil bind at .450. Requires part number ARC_DJ-1046 retainer and keeper kit. May require head...

2 Pack of Heavy Duty Valve Springs for Honda GX240, GX270, GX340, & GX390.Approx 50 lbs at 1.125 installed height, 42lbs at 1.2, with 110 lb open pressure (.375 lift).

2 Pack of Stock Appearing Valve Springs for the Briggs Animal

*Depending on availability, pushrods may be black anodized or uncoated. This is a pair of the "Do It Yourself" pushrod kit which features a 5.75" long shaft with 2 ball type ends. The rods are made...

New Stainless Steel Pushrods for the BSP/Clone/GX200/ non-Hemi Predator Engines. Stock Length. Price is for 2 pushrods

OEM Honda 13011-ZOT-801 piston rings are .010" (.25mm) over standard size and can be used with oversized pistons, OR as file-fit rings for standard pistons. Pack includes 2 oil rails and an expander...

Predator MLS head gasket .018" thick by 72mm(2.835") bore. MLS stands Multi Layer Steel. MLS head gaskets feature embossed stainless steel Viton coated outer layers for excellent sealing and...

HONDA Original Parts These rings are .020 Over Standard and can be used with an oversize piston or used as file to fit on a .010 over or standard piston The chamfers on these rings, especially...

This is a Stock OEM Predator Fiber Head Gasket with Fire Ring approx .040" thick.

Hardened billet crank gear for the Briggs 5hp Raptor flathead. 1.005" I.D

3/8-24 Right hand thread male tie rod end.

3/8-24 Left hand thread male tie rod end.

5/16-24 Right hand thread male tie rod end.

5/16-24 Left hand thread male tie rod end.

Horizontal Rack and Pinion Assembly, drilled and tapped shaft (3/8-24 R/H) Designed to be used on JR Dragsters.Precision Machined billet aluminum housing with single piece steel rack and integrated...

Vertical Rack and Pinion Assembly Designed for JR DragstersPrecision Machined billet aluminum housing with single piece steel rack and integrated rack gear with 5/8" diameter shaft.Overall...

 Heat Shield & Chain/Clutch Guard for MOST 196cc and 212cc OHV engines is made of 3/16 aluminum with a vertical heat shield for protecting the driver’s arm from radiating heat from the...

Box Stock Project GX200 Clone Bare Block

*Depending on availability, pushrods may be black anodized or uncoated. Set of 2 .187" Diameter, chromoly pushrods. Fits Predator 212 Hemi. Stock length 5.540"

ARC's CNC Machined aluminum cable clevis for throttle cables. This is a quality, precise part that is used on all of our Top Plate Throttle kits and is useful for almost all applications when using...

16ft 3/16" Hydraulic Brake Line