This kit will fit Predator 212cc, Honda GX160, GX200 engines, and most Chinese 6.5HP OHV Clone engines.
This contains the parts included in our performance kits that use the standard adapter.
(1) Angled Air Filter 3-1/2 x 4
(1) Billet Aluminum...
Vent your fuel tank and valve cover when using the popular billet air filter kits! This kit includes a breather for the fuel tank and one for the valve cover. A zip tie is included for the valve cover breather hose. This fits all popular Predator, Clone,...
Fabric Air Filter
The standard angled air filter used in most 4 cycle karting engines. 3-1/2" x 4" with a 20 degree angle. The inside diameter of the mounting flange is 2-7/16". Most OHV kart engines will require an angled air filter!
This valve cover breather filter is perfect for use when adding an aftermarket air filter to the Clone, Honda, BSP, and Predator engines. Rubber end has a 12mm opening.
This is the newest version of our Predator performance air filter kit. The kit comes with the following:
K&N style angled air filter
ARC billet aluminum air filter adapter, Made in the USA
Outwears pre-filter in black
Bored carburetor jet (...
Heavy rubber coated gasket that goes between the airbox or air filter adaptor and the stock carburetor
This little bracket bolts to the back of our billet air filter adapter to keep the choke lever in place. Without the stock air box, or this little device, the choke lever will pop off. This bracket requires the odd-shaped, thick, rubber-coated metal...
A simple, inexpensive way to protect your engine without sacrificing horsepower. Pre-Filters are made from high quality materials with a welded seam for strength. They will work on any exposed air filter and will NOT void your warranty. Guaranteed to...
Funneled air filter adapter for the Clone/GX200 Engines. Choke lever bracket included.
Cone Air Filter, Race, 3" x 2.25"
Inside diameter is 39mmStainless Steel CapFits 22mm Small Body Mikuni carbs.
Color may vary. Carb not included
Billet aluminum air filter adapter funneled and ported for the carburetor air orifices. Backside is pre-drilled for the ARC_DJ-1257 choke hold bracket
Distance from center to center mounting holes: 1-11/16" or 44mm