Kit contains two .1 mm shims and two .2 mm shims
This flywheel puller is designed for those who don't want to use the "knocker" method to remove their flywheel. Works with:
ALL ARC Flywheels with Steel Adjustable Timing Hubs
PVL Clone flywheel
To use, install the...
Crankshaft Holder Tool for 3/4" cranks
No more struggling to hold the crank when torqueing a flywheel! This tool slides over any 3/4" keyed crank and allows the flywheel to be torqued properly.
Simply slide this tool onto the crank, insert key and the...
Camshaft Installation Tool
Made from .220" thick acrylic, this tools allows you to mock up your engine and inspect clearances such as cam lobe to cylinder, cam to rod, and crank to cam. Simply slide this tool over the cam and crank and lightly bolt to...
Briggs & Stratton Carburetor Wrench.
Tri-Flow Superior Lubricant provides twice the lubricating power of most competitive brands. It"™s light viscosity allows for deep penetration into hard to reach moving parts.
Kit contains 10 each of .019, .024 and .034 washers.
Perfect Gas-Oil premix every time. No guesswork, no figuring, no mistakes.
1/4" Allen wrench to use with our ARC6934 air filter adapter.
Crankshaft Holder Tool for 1" Cranks
This tool slides onto 1" cranks and allows you to bolt the plate to the sidecover for torquing flywheels or turning the crank when building an engine. The included 1/4" square key locks the hub to the crank. Also has...
For loosening or tightening.