Kit contains two .1 mm shims and two .2 mm shims
For cylinders 1-1/2" to 3" diameter. Made of blued spring steel. Leaves warehouse in 1-2 business days.
Use to measure to measure rod clearance.
Use for setting valve clearance.Has 9 leaves, 0.0015, 0.002, 0.003, 0.004, 0.006, 0.008, 0.010, 0.012, 0.015
Sets consist of 1/2" wide leaves nested in a steel frame. Each leaf is clearly marked with the thickness. A lock keeps individual leaves secure...
This flywheel puller is designed for those who don't want to use the "knocker" method to remove their flywheel. Works with:
ALL ARC Flywheels with Steel Adjustable Timing Hubs
PVL Clone flywheel
To use, install the...
High temperature grease for lapping, grinding, sharpening and polishing metal surfacesContains sharp, graded and extremely hard grains of silicone carbide. Two .75 ounce tubes included
Helps in valve grinding operations on automotive, industrial and...
Crankshaft Holder Tool for 3/4" cranks
No more struggling to hold the crank when torqueing a flywheel! This tool slides over any 3/4" keyed crank and allows the flywheel to be torqued properly.
Simply slide this tool onto the crank, insert key and the...
Use the right socket when torquing ARC rod bolts! This 1/4" drive, 12 point, 1/4" socket will help you get the proper torque on your new billet rod!
For small engines and outboard motors. Makes ignition and valve work easy. Turn crankshaft after flywheel has been removed. Leaves warehouse in 1-3 business days.
Suction cup style with 15/16" and 1-1/16" diamter cups. Fits all small engines. Leaves warehouse in 1-3 business days.
Camshaft Installation Tool
Made from .220" thick acrylic, this tools allows you to mock up your engine and inspect clearances such as cam lobe to cylinder, cam to rod, and crank to cam. Simply slide this tool over the cam and crank and lightly bolt to...
Torque Wrench, 1/4" Drive, 20 to 200 Inch Lb. Great for torquing rod bolts and other small engine fasteners