Briggs & Stratton Performance & Replacement Parts - World Formula, Animal, I/C and more.
Billet Oil Fill Cap w/ o-ring
Fits ALL ARC Billet sidecovers only
This will NOT work in the following engines
Briggs and Stratton
This flywheel puller is designed for those who don't want to use the "knocker" method to remove their flywheel. Works with:
ALL ARC Flywheels with Steel Adjustable Timing Hubs
PVL Clone flywheel
To use, install the...
ARC Rod Bolt Set, 1-1/4" LG HD This rod bolt set is made from top quality materials, the bolts are high tensile strength. In the pictures, the threads are enclosed in plastic tubing for protection. Torque bolts to 170 in/lbs.
2ft .070 Buna-n O-Ring for our 6052,6057 and 6058 Billet Sidecovers
ARC Stock length billet rod with bearing inserts for the Briggs Flathead 5HP EngineARC Stock length billet rod with bearing inserts for the Briggs Flathead 5HP Engine 3.875" center-to-center. Uses Bearing inserts. Has ARC's exclusive forced oiling scoop...
Top Plate Linkage KitTop Plate Linkage Kit designed for ARC Racing top plates. Everything you need to hook up your throttle cable.
SFI certified billet aluminum flywheel for the Briggs & Stratton 5 HP flathead engine. The keyway is installed to advance the ignition timing to 30 degrees BTDC. The flywheel weighs 4.05 lbs. You can use either the stock pull starter or a hand-held...
Connecting Rod Bolts with Washers
These bolts are 1/4-28 x 1" long
12 point. 170,000 lb tensile strength C37 Rockwell ATSM spec bolt.
For use in the ARC stock length Briggs 5hp flathead rods.
These will not work for the Honda GX200, 196cc Clone, or...
High Quality and Performance in a Head Gasket for Briggs 5hp Flathead Raptor Engines
.010 Valve Spring Shim
Coil Bracket Assembly for using the small diameter 3HP style flywheels on the Raptor/5HP Briggs engines
PVL ignition coil 555681 has a 12,000 RPM limit! For use on Animal, World Formula, and with the ARC PVL billet flywheels. You must use the specific PVL flywheel with this coil