Small Engine Performance parts for Predator, Briggs, Honda, Box Stock 196cc & Clone Engines. Replacement parts, Stage Kits and more.
Stock Bolt for attaching Recoil Starter to Blower Housing M6 X 10
This is a 100% stock take-off item. The fuel hose w/clips that comes with each engine.
Box Stock Project GX200 Clone Bare Block
This 32mm intake valve with a 5.5mm valve stem. The stock valve seat will need to be removed and the seat #6149 must be installed. This valve is top quality and has a radius-type keeper groove. Will fit stock valve guide. Use ARC #DJ-1047 HP valve...
Stock Blower housing for Clone / GX 200
Metal Cover, Behind Flywheel Stock Part for Clone Engine, Helps direct air flow where it is needed for cooling
Standard, stock size piston for the GX200/Clone engines.
CLONE/GX200 3.298 Long Stock Rod.This is a stock cast rod that is -.005 under stock lenth
.005" over stock size piston for the GX200/Clone engines. Piston only, does not include circlips or wrist pin.
This is a slightly oversized (file-to-fit) compression ring used in a standard bore Box Stock clone engine. It is basically designed to close up the end gap on the compression ring since "stock" compression ring gaps are generally too wide...
This is a +.010 Over Standard Top Ring for the GX200/Clone stock piston.
Use these rings for the DJ-1285-20 Piston