Product Description(3) Loops Oregon OEM 90PX044G Chainsaw Chain
- Pitch: .375"
- Gauge: .043"
- Bar size: 12"
- Drive Links: 44
Make sure you confirm pitch, gauge, & drive links on your current bar! Not all bars take the same amount of links!
Recommended saw sizes:Use with gasoline-powered saws 2.3-3.8 cubic inches (38-62cc)
Kickback reducing features: Bumper Link. This Oregon saw chain is low kickback chain. It met the kickback performance requirements of ANSI B175.1 when tested on a representative sample of chainsaws. Its safety features significantly reduce the hazard of kickback while maintaining high cutting performance. ALL CUTTING CHAINS CAN KICK BACK, which may result in severe personal injury to the saw operator or bystanders. Operate your saw safely. Read all warnings in your chainsaw operator's manual. Bumper Link
Key Features & Benefits:
Chamfer-chisel cutter shape:
- Outstanding performance, fast and efficient cutting
- Excellent stay-sharp
- Smooth feel during use, smooth cut surfaces
- Reduces the tendency of saws to “skate”
Vibe-Ban™ low-vibration design:Reduces the risk of vibration-related injury
Narrow Micro-Lite™ kerf (.221”):
- Less power is required to make the same length of cut
- Helps the saw cut faster
Narrow 1.1mm (.043”) gauge and weight- reducing slots in the guard tie straps:
- Less power is required to drive the chain
- Lighter weight, helps minimize user fatigue
- *Micro-Lite™ bar-and-chain combinations are approximately 15% lighter than standard combinations
Lubrilink™ tie straps and Lubriwell™:Improved chain and bar lubrication, helps keep oil drive links where it’s needed, reduces volume of oil required
Tall cutter shape, fits 4.5mm round file: Makes sharpening easier
Bumper tie straps and ramped depth gauges:Low kickback, meets ANSI and CSA standards.
Aft position of top plates:Stabilizes the cutter for faster smoother cutting.
Forward-pointing spear stamped on the cutters and tie straps:Indicates the proper chain-cutting direction.
Witness marks on each cutter’s top plate: Makes it easier to hold the file at the correct angle during sharpening.